Bright Annealed Tubes
Similar Products
Heat Exchanger Tubes
100% PMI test, 100% Hydraulic test, 100% inner cleaned by sponge, 100% Dimension test, 100% Surface test.
Special Shaped Tubes
Huashang stainless steel tube size, pipe finishing and material as per request of the customer.
Hexagon Steel Tubing
Large stainless steel tube hexagon steel tube. OD: MAX106.5mm*ID MAX80mm. LENGTH: CUT TO LENGTH.
Product description
Bright Annealed Tubes Description
Bright annealed stainless steel tubeis a kind of high precision steel tube material after finishing or cold rolling. Due to the advantages of no oxide layer both inside and outside wall, no leakage under high pressure, high precision, high finish degree, no deformation and flaring, no cracks flattening, precision bright annealed tube is mainly used to produce pneumatic or hydraulic components, such as air cylinder or gas cylinder. It can be seamless tube, and also welded pipe. The chemical components of precision bright annealed tube are C, Si, Mn, S, P, Cr.
Bright annealed stainlesssteel tube can be used for industries like automobile, and mechanical parts which have higher requirements for steel pipe precision and surface finish. Bright annealed stainless steel tubes are not only for higher precision and finish requirements, its tolerance can be maintained in 0.02-0.08mm, so many mechanical processing users gradually replace seamless steel tube or round steel with precision bright annealed tube in order to save labor, material, and time.
The traditional annealing approach is performed in a so referred to as open furnace, where the atmospheric oxygen reasons scaling of the heat treated materials, which makes the surface rough. HUASHANG STEEL has developed a one of a kind bright annealing process, the heat treatment is carried out in a so-called closed furnace. The warmth handled materials is covered by means of an inter-fuel atmosphere, which ensures the oxygen cant enter the furnace or come in to contact with the substances and react to shape scale on or tarnish the materials. The surface end is clean, bright and precision, which is a top-notch beginning point for a similar system, like electro-polishing and mechanical polishing.
Especially for the annealed tubing with size greater than 12 meters, the ordinary pickling tube is very hard to clean the internal surface, however, with the bright annealing method, our tubing is much cleaner, smoother on both inner and outer surface. We use bright annealing method, the temperature of the furnace can reach greater than 1350℃, and the tolerance for the putting and real temperature can be controlled Within ±2℃, which is bright annealed stainless' s special advantage, compared with the regular one.
To ensure the quality, all tubes are done 100% PMI, 100% Hydraulic test, 100% inner cleaned by sponge,100% dimension test, and 100% surface test. What is more, our quality of precision drawn tubing is same to precision rolling but has more advantage on price? We are using the advanced cold drawn technology from Japan and Korean, making the close dimension controls. Huashang steel offers discount bright annealed seamless steel pipe used for instrument tubing, chromatography tubing, hydraulic tubing, high-pressure tubing, cleaned tubing, multi-core tubing.
Type Of Tube: Welded tubing and Seamless Tubing
Straight Tubes Bright Annealing Advantages
Bright Annealed TubeSizes
welded tubing size range
OD: 0.19mm--44.5mm, T.W: 0.08mm--3.81mm
Length: CUT TO LENGTH
The seamless straight tubing & bright annealed tubing sizes:
|
OD(mm)*T.W (mm) |
|
6×1/6×1.5 |
|
10×1/10×1.5/10×2 |
|
12×1/12×1.5 |
|
16×1/16×1.5/16×2 |
Bright Annealed Tubes Materials
Austenitic Stainless Steel:
TP304, TP304L, TP304H, TP304LN, TP316/TP316L, TP316H, TP316Ti, TP316LN, TP321, TP321H,TP317, TP317L, TP347, TP347H, TP310S, TP310H, TP904L, 254Mo. S30432, S31042, N08367
Duplex & Super Duplex Steel: S31500, S32101, S32003, S32304, S31803, S32205, S32750, S32760
Nickel Alloy Steel:
N06600, N06601, N06625, N07718, N08800, N08825, N10276, N04400, N05500, N02200, N02201, N08028, N08810, N08811, N08020, N10624, N10629, N10675
Bright Annealed Tubes Standard
ASTM A789, ASME SA789, EN10216-5, ASTM B163, ASTM B167, ASME SB163, ASME SB167, ASTM B668, ASME SB668, ASTM A269, ASME SB677, ASTM A213, ASME SA213, ASME SA269, ASMT A270, ASTM B622, ASTM B516
Heat Treatment: Bright Annealed
NDT: Eddy Current or Hydraulic test or UT
Chemical Composition of Nickel Alloy, Duplex steel & Austenitic Steel
|
Grade |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
Ti |
N |
Cu |
Fe |
Al |
Co |
Zr |
Nb |
Tu |
Va |
|
Max |
Max |
Max |
Max |
Max |
Max |
Max |
Max |
Max |
Max |
|||||||||
|
Nickel Alloy |
||||||||||||||||||
|
Inconel 600/No6600/2.4816 |
1 |
14-17 |
≧72 |
|||||||||||||||
|
Inconel 600/No6601/2.4851 |
21-25 |
58-63 |
1 |
|||||||||||||||
|
Inconel 690/No6690 |
27-31 |
58 |
||||||||||||||||
|
Inconel 625/No6625/2.4856 |
20-23 |
≧58 |
≦0.4 |
5 |
≦0.4 |
|||||||||||||
|
Inconel 718/No7718/2.4668 |
17-21 |
50-55 |
Remainder |
|||||||||||||||
|
Incoloy 800/No8800/1.4876 |
1 |
19-23 |
30-35 |
≧39.5 |
||||||||||||||
|
Incoloy 800H/No8810/1.4958 |
1 |
19-23 |
30-35 |
≧39.5 |
1 |
|||||||||||||
|
Incoloy 825/No8825/2.4858 |
1 |
38-46 |
≧22 |
|||||||||||||||
|
C-276/No10276/2.4819 |
1 |
Balance |
3-4.5 |
|||||||||||||||
|
Monel 400/No4400/2.4360 |
2 |
≧63 |
28-34 |
|||||||||||||||
|
Monel K-500/No5500 |
63 |
27-33 |
2 |
|||||||||||||||
|
Alloy 20/No8020/2.4660 |
1 |
2 |
19-21 |
32-38 |
Balance |
8C-1 |
||||||||||||
|
Alloy 28/No8028 |
1 |
26-28 |
30-34 |
Remainder |
||||||||||||||
|
Duplex Steel |
||||||||||||||||||
|
S31803/1.4462 |
1 |
2 |
21-23 |
|||||||||||||||
|
S32205/1.4462 |
1 |
2 |
22-23 |
|||||||||||||||
|
S32750/1.4410 |
24-26 |
|||||||||||||||||
|
S32760/1.4501 |
1 |
1 |
24-26 |
|||||||||||||||
|
Austenitic |
||||||||||||||||||
|
304/1.4301 |
1 |
2 |
18-20 |
8-10.5 |
||||||||||||||
|
304L/1.4307 |
1 |
2 |
18-20 |
|||||||||||||||
|
304H/1.4948 |
1 |
2 |
18-20 |
|||||||||||||||
|
316/1.4401 |
1 |
2 |
16-18 |
|||||||||||||||
|
316L/1.4404 |
1 |
2 |
16-18 |
|||||||||||||||
|
316H/1.4919 |
1 |
2 |
16-18 |
|||||||||||||||
|
316Ti/1.4571 |
1 |
2 |
16-18 |
|||||||||||||||
|
321/1.4541 |
1 |
2 |
17-19 |
|||||||||||||||
|
321H/1.4878 |
1 |
2 |
17-19 |
H |
||||||||||||||
|
317/1.4449 |
1 |
2 |
18-20 |
|||||||||||||||
|
317L/1.4438 |
1 |
2 |
18-20 |
|||||||||||||||
|
347/1.4550 |
1 |
2 |
17-19 |
|||||||||||||||
|
347H/1.4912 |
1 |
2 |
17-19 |
|||||||||||||||
|
310S/1.4845 |
1 |
2 |
24-26 |
|||||||||||||||
|
310H/1.4845 |
1 |
2 |
24-26 |
|||||||||||||||
|
N08904(904L)/1.4539 |
1 |
2 |
19-23 |
|||||||||||||||
|
S31254(254Mo)/1.4547 |
1 |
|||||||||||||||||
Bright Annealed Tubes Specification/Technical Data
Bright Annealed Tube Pressure Calculation Formula
Pressure =(wall thickness * 2 * tensile strength of steel tube)/(outer diameter * coefficient)
Wall thickness =(pressure * outer diameter * coefficient)/(2* tensile strength of steel tube)
Steel tube pressure P<7Mpa coefficient S=8
7< steel tube pressure P<17.5 coefficient S=6
The pipe pressure P>17.5 coefficient S=4
Application Areas
Shipbuilding industry, also known as shipbuilding industry, is one of the most expensive iron and steel products in the whole iron and steel product market. The operation and development of shipbuildi...MORE+
Chemical Process
Our precision tubes and pipes are reachable in a wide vary of corrosion-resistant substances appropriate for applications like heat exchangers and piping structures.MORE+
Industrial Heating
THE HUASHANG program consists of an good sized vary of merchandise for industrial heating. Our tubular products are widely used in, for example, more than a few kinds of boilers and warmth remedy furn...
WENZHOU HUASHANG STEEL CO., LTD is a large stainless steel precision tubing company, we provide bright annealed stainless steel tubing, bright annealed tubing, annealed stainless steel tubingand etc. Want to know more?please contact us.
Send product request
Other supplier products
 |
45 Degree Elbow | We are manufactures and suppliers of buttweld 45 degree elbows that are popularly referred to as '45 ELBOW or 45 BENDS'. Joined to a pipe at 45 deg... |
 |
Stainless Steel Capillary Tubes | Product description Stainless Steel Capillary TubeDescription: Whether you need to exchange device tubing as a section of your troubleshooting or w... |
|
|
Boiler Tubes | Boiler Tubes for SaleDescription HUASHANG,pipe fittings manufacturers in china, has the cold draw computing device which is 70 meters long, can pr... |
|
|
Reducing Tee | We are manufacturers, suppliers, and exporter of , branches diameters are different with the other two main pipe diameters and are called three-way... |
 |
Stainless Steel Capillary Tubes | Product description Stainless Steel Capillary TubeDescription: Whether you need to exchange device tubing as a section of your troubleshooting ... |
Same products
 |
MONSA® DDAC-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: MONSA® DDAC-50 It functions by causing the cell membrane of bacteria to rupture... |
 |
MONSA® DCA-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: disodium cocoampho diacetate Disodium cocoamphodiacetate for skinis a very mild amp... |
 |
MONSA® CTAC-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride Cetyl Trimethyl Ammonium Chloride is an ammonium ... |
 |
MONSA® CTAC-30 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride 30% Cetyltrimethyl ammonium chloride30% is mainly... |
 |
Common Rail Injector | Seller: DIP (DIESEL INJECTION PARTS) PLANTS | Item: Diesel Fuel Injector Model No: MOQ: 1pc Material: SteelPackage Deta... |
