MDB Series Brake Unit
The MDB brake unit series uses advanced power control technology to develop high-performance brake products in combination with a new generation of IGBT power devices.
The power brake unitcan release the electric energy generated by the motor during the braking process through the power resistor (brake resistor) to generate sufficient braking torque to ensure the normal operation of the inverter and other equipment.
Features of MDB Series Electric Braking Unit for Interter
The MDC series brake unit is used in the inverter to transfer the regenerative energy generated by the motor to the brake resistor for release. When a motor brakes, the regenerative energy generated during the braking phase will be fed back to the higher-level inverter device, which will cause the DC bus voltage of the device to rise, affecting the safety and normal operation of the device. The braking unit for inverterwill greatly consume this energy to protect the inverter.
The MDC braking unit for inverter is connected in parallel to the DC bus of the inverter. The bus voltage is limited to an acceptable level and the brake regenerative energy is transferred to the external braking resistor.
The braking resistor releases the brake energy in the form of thermal energy.
The brake unit for motoris connected directly to the frequency converter or inverter via the DC link terminals. When the DC bus voltage reaches a predetermined limit, the brake unit is automatically turned on to prevent the DC bus voltage from continuing to increase. The operation of the brake unit is independent of the frequency converter or inverter.
The brake power brake unit electronics are powered by the DC bus voltage.
In order to increase the braking power, the braking unit for VFDcan be connected in parallel.
The MDC dynamic braking unit is available in 100A and 200A specifications. The product voltage rating covers both 220V and 380V voltage levels.
Send product request
Other supplier products
 |
KE300G Series Explosion-proof Movement Inverter | The main difficulty of the explosion proof variable frequency drive is the heat dissipation problem. Because all components of the explosion-proof ... |
 |
Solar Pump | Solar pump is a solar powered water pump, consisting of a solar ac submersible pumpinverter and a water pump. Portable solar pumpsystem needs to co... |
 |
KE300A-01 Solar Pump Inverter Series | KE300A-01 series micno solar pump inverter adopts MPPT (Maximum Power Point Tracking) and excellent motor drive technology to maximize the power ou... |
 |
Energy Feedback Unit | The energy feedbackfeeds the regenerative electric energy generated in the process of motor speed regulation to the power grid, avoiding the energy... |
 |
Output AC Reactor | Smoothing circuit, efficient from IGBT motor drives, so as to extending service life of electric motors, reduce motor noise and eddy loss, reduce t... |
Same products
 |
FT wax used for EVA-based hot melt adhesive | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | Seller: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | Seller: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19A | Seller: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | Seller: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
