Wine Cellar Cooling Units Split System / HSN-J30
Thenowwine cellar refrigerationunits split system is intended for cellars without access to proper ventilation. They are known for their efficiency and longevity. Each unit is designed to maintain a consistent temperature and humidity in spaces where proper ventilation is not feasible. The evaporator is installed inside and the condensing unit can be placed as far as 30m away. Since it exhausts outside, split cooling systems operate quietly and reduce vibration inside the cellar, which is believed to negatively affect the quality of wine.
Product Description Wine Cellar Cooling Units Split System / HSN-J30 Features:
Auto cooling and heating mode, keep wine cellar under constant temperature.
The evaporator is nickel plated for corrosion protection
Adopt circulating water wet-film auto control humidification system,wet film is made of Swedish organic polymer material with sterilization and disinfection function.
Full touch control system, famous brand sensors, stable quality and performance.
Pull-out design wet film module, easy to replace
Control constant condensation temperature
Three speed air flow under auto control to maintain the ideal environment for long-term wine storage
Can be ceiling mounted, rack mounted, or floor mounted
The specific parameters of Wine Cellar Cooling Units Split System / HSN-J30
|
Model |
Unit |
HSN-J30 |
|
Cellar Size (Up to) |
m³ |
30 |
|
Power |
P |
1 |
|
Power Supply |
V/HZ |
220V/50Hz |
|
Cooling |
W |
1320 |
|
Heating (Electrical) |
W |
4000 |
|
Air Flow |
m3/h |
450 |
|
Static Pressure |
Pa |
30 |
|
Noise |
dB（A） |
50 (Indoor) |
|
Refrigerant |
/ |
R410A |
|
Controller |
PC Full-touch smart control |
|
|
Temperature |
℃ |
10-16℃, ±2℃ |
|
Humidity |
℃ |
50~70%, ±5% |
|
Total Power |
W |
5300 |
|
Humidifier |
Type |
Wet-film |
|
Humidification |
Kg/h |
2 |
|
Indoor Unit Size |
L*W*H(mm) |
945*790*300 |
|
Outdoor Unit Size |
L*W*H(mm) |
860*300*540 |
|
Tube Connection |
Liquid(mm) |
|
|
Gas(mm) |
Send product request
Other supplier products
 |
Constant Temperature And Humidity Air Conditioning Unit | Are you looking for aircon with humidity control? Constant temperature and humidity air conditioning unit is an integrated system which maintain re... |
 |
Wall Mounted Ventilator | Home ventilator is Uni-Flow wall mounted ventilator. It can only bring in fresh outside air, and filtered it even preheated it if necessary. Mainly... |
 |
Residential ERV/HRV | Residential ERV/HRV is whole house ventilation with heat recovery. You can also call it whole home air exchangeror whole house fresh air system. C... |
 |
Residential ERV/HRV | Residential ERV/HRV is whole house ventilation with heat recovery. You can also call it whole house air exchanger or whole house fresh air system. ... |
 |
Commercial Ceiling Mounted ERV/HRV-AQ Series | Thenow commercial ceiling mounted ervenergy recovery ventilator -AQ Series, different with HEPA series, it was designed without HEPA and medium fil... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Seller: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Common Rail injector control valve F00VC01200 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Injector Control Valve Plate 24# | Seller: China Lutong Part Plant | Injector Control Valve Plate 24# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
 |
Injector Control Valve Plate 12# | Seller: China Lutong Part Plant | Injector Control Valve Plate 12# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
