.

CSA Expansive Additive

CSA expansive additive description:

The CSA expansive additive is obtained by blending natural anhydrite with clinker powder which consists of calcium sulfoaluminate and CaO. This CSA expansive additive is always mixed with ordinary cement. When mixed in the proper proportion with ordinary cement and hydrated, cement mortar or concrete expands during the early stages of hydration. It is developed to reduce and compensate the hydraulic shrinkage of cement based construction products. Its performance is similar to Denka CSA #20, which is now widely used in the formulation of different mortars in Europe countries.

We offer two types of these CSA expansive additives, the main specifications are according to JC476-2001

CSA expansive additive technical data:

Parameters

CSAExpansiveadditiveI

CSAExpansiveadditiveII

MgO%

≦5.0

≦5.0

Watercontent%

≦3.0

≦3.0

TotalAlkali%

≦0.75

≦0.75

Chlorideion%

≦0.05

≦0.05

SpecificSurfaceArea

≧200m2/kg

≧200m2/kg

Fineness

≦12

≦12

Settingtime

Initialsettingtime

≧0:45

≧0:45

Finalsettingtime

≦10:00

≦10:00

LimitedExpansiveRate(%)

7daysinwater

≧0.025

≧0.05

21daysinair

≧-0.020

≧-0.010

Compressivestrength(MPa)

7days

≧25

≧25

28days

≧45

≧45

Bendingstrength(Mpa)

7days

≧4.5

≧4.5

28days

≧6.5

≧6.5

CSA expansive additive performance:

(1) As making shrinkage compensated concrete, if the ratio of reinforcement is 0.2%-1.0%, the limited expansive rate will be in the range of 0.02-0.04%, and a prestress of 0.2-0.7Mpa exists in the concrete.

(2) Comparing with the concrete without Expansive Additive, in the condition of defined mixing amount, the free strength of the concrete with Expansive Additive is roughly equal to that of concrete without Expansive Additive. The limited strength is 10~15% higher than free strength.

(3) The impermeability grade of mortar and concrete can reach over S30. The elastic ratio closes to that of common concrete.

(4) Anti freezing: D150.

(5) Sulphate resistance of concrete is increased. No pollution to water.

CSA expansive additive application:

(1) For structural self-waterproofing construction. Effectively preventing cracking or leakage of concrete.

(2) To extend the space length of post casting zone of cast-in-place overlength structure.

(3) To control the crack producing result of temperature difference in large sized structural concrete.

(4) For rigid roofing.

(5) Making non-shrinkage cements.

CSA expansive additive packing:

By 50kgs bags or jumbo bags.

CSA expansive additive Storage:

Store in dry place, guard against damp. Warranty period: 1 year.

OREWORLDis a professional fire brick supplier, we provide csa cement, csa binder and etc. Want to know what is csa cement or more? Please contact us.


Send product request

To: OREWORLD TRADE(TANGSHAN) CO., LTD.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Magnesia Bricks
Magnesia Bricks Magnesia bricks description Magnesia bricks are a kind of alkalescency refractory bricks that made from the sintered magnesium with its content of ...
Fire Clay Bricks
Fire Clay Bricks Main introduction of Fire clay bricks Fire clay bricks refer to refractory bricks containing Al2O3 more than 38%, which is made of high grade bauxi...
CSA Expansive Additive
CSA Expansive Additive CSA expansive additive description: The CSA expansive additive is obtained by blending natural anhydrite with clinker powder which consists of c...
Oreworld Special Cements
Oreworld Special Cements Special cements are cements that serve some specific function such as altering the setting or hardening behavior of a concrete, producing different...
CSA Cement
CSA Cement What Is CSA Cement? CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast se...
All supplier products

Same products

FT wax used for EVA-based hot melt adhesive
FT wax used for EVA-based hot melt adhesive Seller: Syntop chemical Co.,Ltd. Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for...
high melting point FT wax improve the heat resistance of adhesives
high melting point FT wax improve the heat resistance of adhesives Seller: Syntop chemical Co.,Ltd. FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische...
For hot melt adhesive high melting point FT WAX
For hot melt adhesive high melting point FT WAX Seller: Syntop chemical Co.,Ltd. The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ...
Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19A
Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19A Seller: China lutong Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection...
High melting point FT wax used as plastic processing additives
High melting point FT wax used as plastic processing additives Seller: Syntop chemical Co.,Ltd. Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm...