RF Admittance Level Switch
FEEJOY RF admittance point level switchmeasures the medium through high-frequency wireless waves, which is a more advanced RF admittancetechnology to exchange capacitance measurement. The RF type level switch consists of three parts of RF admittance level sensor: Measuring probe, Shield and Ground terminal. Our FRFS series RF level switch is widely used in the alarm and control of liquid, slurry, material level and two liquid interface levels. Compared with other similar RF admittance level switch products, it has higher system stability and may work reliably even under extremely harsh field conditions. And the RF type level switch is not suffering from the hanging material, temperature, pressure, density, humidity, and even the chemical properties of the fabric.
Specification of RF Admittance Level Switch
As afloat type level switch manufacturer, we can manufacture according to customer's specification kike below:
|
Product Name |
radio frequency admittance fuel level controller |
|
Wetted part Material |
SUS304 and SUS 316L |
|
HS Code |
9032899090 |
|
Working Pressure |
Max 3.0 MPa |
|
Process temperature |
Max 800 deg c |
|
Output |
DPDT relay(double-pole double-throw) |
|
Contact Capacity |
220VAC, 5A-no sense, 3A-sense |
|
Response Time |
|
|
Delay Time |
|
|
Explosion-proof Grade |
Explosion-proof: dIIBT4~T6 |
|
Process connection |
thread/ flange, etc |
Features of RF Admittance Level Switch
The RF admittance type level switch can measure the liquid level and material level, and the level switch admittance type can meet the measurement requirements of different temperatures, pressures, and media.
It is not affected by the RF admittance level sensor hanging material and does not need to be cleaned regularly to avoid the wrong measurements.
There are no moving parts in the measurement process of the RF admittance type level sensors, and there is no problem with damage to mechanical parts.
No maintenance, intelligent adjustment-free of RF admittance level switch for liquids.
Contact measurement, strong anti-interference ability, can overcome the influence of steam, foam, and stirring on the measurement.
RF admittance level measurement quantity is diversified, which makes the measurement more accurate, the measurement is not affected by environmental changes, and the stability is high.
Reliable product performance and long service life of RF admittance level sensors.
FEEJOY can supply OEM service for RF admittance level switch among all level switches manufacturers, which include material, working pressure, output, etc.
Application of RF Admittance Level Switch
Conductive and insulating liquids: Chemical industry, oil field, water and sewage treatment
Conductive and insulating paste: Paper, pharmaceutical, water and sewage treatment
RF admittance level sensor powder: Ash, powder, Power plant, metallurgy, cement
Particles: coal, grain power, plant, metallurgy, grain
Interface: two different liquids, oil field, chemical industry
The RF admittance level switch is the RF admittance level meter, and the potentiometer W1 of the radio frequency admittance level meter is a sensitivity adjustment potentiometer: the LED two-color display lamp lights in green when there is no material, and the red light when there is one. After the meter is powered on, the green light is on when the level is lower than the set value.
At this time, slowly adjust the potentiometer W1 clockwise until the red light is on, and then adjust it 3 times counterclockwise (0.5 to 3 times for non-conductive materials, conductive material 5 ~ 7 circles) and the green light is on (the status of the output relay's contacts should change with the change of the traffic light display state). According to the measurement part of different RF admittance level transmitters, it should be covered by materials at about 75mm.
RF Admittance Level Switch FAQs
What is RF admittance level switch?
RF admittance level switch compared to capacitance level switch adopts more advanced RF admittance technology instead of capacitance measurement, which solves the problem of material adhesion.
Why choose RF admittance level switch?
Feejoy is aprofessionalindustrial instrumentation suppliers, we provide Capacitive Level Sensor, Turbine Flow Meterand etc. Want to know more? Contact us.
Send product request
Other supplier products
 |
Pneumatic Air Hammer | There are many kinds of pneumatic vibration equipment, such as ball vibrators, roller vibrators, air vibrators, pneumatic turbine vibrators, etc. T... |
 |
Mini Float Level Switch | Feejoy is very professional industrial instrumentation manufacturer for more than 16 years.Nowadays, it is not an era of lack of suppliers, what is... |
 |
Magnetostrictive Level Transmitter | FEEJOY Magnetostrictive Level Transmitter is a very important part of the automatic control system. The magnetostrictive level gauge is a new produ... |
 |
RF Admittance Level Switch | Feejoy is very professional industrial instrumentation manufacturer for more than 16 years.Nowadays, it is not an era of lack of suppliers, what i... |
 |
Multi Point Level Switch | FEEJOY Multi Point Level Switch can achieve the purpose of controlling the liquid level through the floating ball on the liquid surface. Our multip... |
Same products
 |
FT wax used in candle for increasing hardness | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax offers several significant advantages when used in candles: Aesthetic benefi... |
 |
2UUL SP01 Grip X Phone Screen Heating Separator with Suction Pad | Seller: SHENZHEN PHONEFIX TECHNOLOGY CO.,LTD (CHINA PHONEFIX) | Professional repair efficiency starts with precision tools. Introducing the YCS integrated BGA... |
 |
2UUL SP01 Grip X Phone Screen Heating Separator with Suction Pad | Seller: SHENZHEN PHONEFIX TECHNOLOGY CO.,LTD (CHINA PHONEFIX) | Professional repair efficiency starts with precision tools. Introducing the YCS integrated BGA... |
 |
Anti Insect Net | Seller: Shandong Gold Hongye Net Co., Ltd | Anti Insect netis suitable for plants of different sizes, indoor and outdoor gardens, and effecti... |
 |
FT wax used in plastics: injection moulding, extrusion and pelletisation | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is widely used in plastics processing, particularly in industries such as inj... |
