Altitude Control Valve
ZECO Valve Group is established in 1991, as an experienced china valve manufacturer. We have 5 factories in China, which are located in Shanghai, Yancheng and Wenzhou, which mainly manufacture pressure reducing valve, pressure relief valve, balancing valve, PICV, water valveand industrial valves.
Features of Altitude Control Valve
lAutomatic tank fill and shut-off without the use of floats or sensors;
lAccurate shut-off to within inches of set point;
lHigh level point adjustable with single screw;
lExhaust-to-atmosphere operation allows minimum pressure loss.
Altitude Control Valve Working Principle
Altitude control valve closes at a preset maximum water level to prevent overflow from an above-ground storage tank or cistern and opens to replenish water when the level of the storage tank or cistern is lowered. Altitude control valvewith a competitive altitude valve pricecontrols the high water level of the reservoir without floats or other devices. It remains fully open until it reaches the closed water level. The altitude valve operationis designed for one-way flow only. The altitude valveis hydraulically operated with a pilot control. The pilot control operates based on the force difference between the spring load and the water level in the reservoir. The pilot control measures the reservoir head through a customer supplied sensing tube connected directly to the reservoir.
Altitude Control Valve Material and Standard
Size Range: 2"~24"Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.5/16.42, AS4087, EN1092-2
Coating: WRAS approved Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
|
Part |
Material |
Standard |
|
Body |
Ductile Iron |
EN 1563/DIN 1693 |
|
Bonnet |
Ductile Iron |
EN 1563/DIN 1693 |
|
Trim |
Stainless Steel 304 |
EN 10088-1/ASTM A959 |
|
Seat |
Stainless Steel 304 |
EN 10088-1/ASTM A959 |
|
Diaphragm |
EPDM / NBR |
ISO 4633 |
|
Pilot Valve |
Stainless Steel 304 |
EN 10088-1/ASTM A959 |
|
For materials options not listed, consult factory. Zeco manufactures valves in more than 50 different alloys. |
||
Send product request
Other supplier products
| Lug Butterfly Valve | Features of Lug Butterfly Valve Low opening torque, Radial dynamic balance sealing system is adopted, so that the forces on both sides of the inle... | |
| Pneumatic Butterfly Valve | As one of the leadingchina ball valve suppliers, ZECO Valve Group developed our own laboratory for research &development for international stan... | |
| Balancing Valve | ZECO is currently the only manufacturer in China with accurate KV data and support debugging services for balancing valve. We have our own dynamic ... | |
| Manual Balancing Valve | Festures of manual central heating balancing valve Straight flow structure, low fluid resistance; Handwheel display the number of opening cyc... | |
| Metal Seated Gate Valve | Features of Metal Seated Gate Valve The stem is permanently sealed by three independent seals, and if the seal wears out after long use, the gland... |
Same products
| FT wax used for EVA-based hot melt adhesive | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... | |
| high melting point FT wax improve the heat resistance of adhesives | Seller: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... | |
| For hot melt adhesive high melting point FT WAX | Seller: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... | |
| Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19A | Seller: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... | |
| High melting point FT wax used as plastic processing additives | Seller: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |













