Thick Copper PCB
PCBs are usually bonded to a layer of copper foil on a glass epoxy substrate, the thickness of which is usually 18μm, 35μm, 55μm and 70μm. We manufacuture 1 oz copper pcbprinted circuit boards.
The most commonly used thickness of copper foil is 35μm. The use of that in China is generally from 35 to 50μm while there are also thinner ones than this such as 10μm and 18μm and thicker ones than this such as 70μm. The thickness of copper foil on 1 ~ 3mm thick substrate is about 35μm; that on less 1 mm 18μm and that more than 5mm 55μm.
If the thickness of the copper foil on the PCB is 35μm and the conductor width is 1mm, then its resistance value is about 5mΩ and its inductance is about 4nH for every 10mm length. When the di/dt of the digital integrated circuit chip on the PCB is 6mA/ns with the 30mA working current, the resistance and inductance contained in each 10mm printed line which are used to estimate the noise voltage generated by each part of the circuit are relatively 0.15mV and 24mV.
Types of thick copper PCB
single-sided PCB, double-sided PCB, multilayer PCB, flexible PCB, buried via PCB.
Maximum processing size
For single-sided, double-sided PCB: 1000mm * 600mm;
For PCB multilayer board: 600mm * 600mm
The highest number of layers:
20 layers
Thickness
Rigid PCB: 0.4mm -4.0mm;
Flexible PCB: 0.025mm-0.15mm
Base material copper foil thickness
Rigid PCB: 18μm(1/ 2OZ ), 35μm( 1OZ ), 70μm( 2OZ)
Flexible PCB board: 0.009MM 0.018mm 0.035mm 0.070mm 0.010mm
Common substrates for thick copper PCB
FR-4, CEM-3, CEM-1, 94HB, 94VO, polytetrachloroethylene, polyester, polyamide.
The processing capability of thick copper PCB
Drilling hole: minimum hole diameter 0.15mm
Hole: minimum aperture 0.15mm, plate thickness/aperture ratio 4:1
Wire width: minimum wire width: gold plate 0.075mm, tin plate 0.10mm
Wire spacing: minimum spacing: gold plate 0.075mm, tin plate 0.10mm
Gold-plated plate: nickel layer thickness: ≧2.5μm; gold layer thickness: 0.05-0.1μm or according to customer requirements
Tin spray board: tin layer thickness:≧2.5-5μm
Milling plate: minimum distance from the line to edge: 0.15mm; minimum distance from hole to edge: 0.2mm; minimum profile tolerance: ±0.12mm
Socket chamfer: angle: 30°, 45°, 60°; depth: 1-3mm
V cut: angle: 30°, 35°, 45°; depth: 2/3 board thickness; minimum size: 80mm * 80mm
Soldering resistance: 85-105℃ / 280℃-360℃
Flexural resistance/chemical resistance of the flexible board: in full compliance with international standards.
If you have questions about our thick copper PCB printed circuit board production capacity, or the specifications required for your custom project are not listed on this page, please feel free to contact us. We will reply within one workday. We will continue to provide quotation support and design support. Welcome to learn about our production process.
ZF Electronics is a professional pcb manufacturing companiesand heavy copper pcb manufacturers. as a professional board manufacturing company, we provide cu thickness pcb, 1 oz pcb thickness, 4 oz copper pcband etc. Want to know more? Contact us.
Send product request
Other supplier products
 |
Buried Via PCB | ZF Electronics is a China Shenzhen-based printed circuit board assembly manufacturerand PCB assembler. Shenzhen has been the world's center of elec... |
 |
Multilayer PCB | Printed circuit board (PCB) now plays the most important role in electronic products. The PCB used in the past was very simple and limited to a sin... |
 |
Multilayer PCB | ZF Electronics, as one of the top pcb fabrication companiesin China, can provide customers with single-sided PCB, double-sided FR4 PCB, metal core ... |
 |
Rogers PCB | With the development of electronics, the production of electronic products also requires more and more materials, such as high-frequency materials.... |
 |
Single Sided PCB | A single sided PCB, also known as one layer PCB, is a kind of printed circuit board produced by circuit board company. Only one side of a printed c... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Seller: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Common Rail injector control valve F00VC01200 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Injector Control Valve Plate 24# | Seller: China Lutong Part Plant | Injector Control Valve Plate 24# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
 |
Injector Control Valve Plate 12# | Seller: China Lutong Part Plant | Injector Control Valve Plate 12# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
