Dome Arrays
Niceone-tech is a professional human machine interface control modulemanufacturer. Niceone-tech has always been people-oriented, and should constantly improve the working environment and living environment of employees, so as to enhance the centripetal force of employees to the enterprise so that employees can concentrate on their work. Because of this, although Nicone-tech is now only a 70-person factory, our staff is very united. Over the past five years, Niceone-tech has developed a variety of custom membrane switches, silicone rubber products, and the plastic that has been sold to different countries and has been well received by customers. All this is inseparable from the efforts of each of our personnel.
Dome Arrays
Dome is a tactile product, so choosing a good Dome is one of the prerequisites for creating an excellent membrane switch. Then the load, structure and life of the shrapnel are also points that customers should pay attention to.
Custom Dome Arrays and Dome Slices
Force:
Because Dome chooses multiple loads based on whether the customer's panel is convex, the thickness of the panel, and even the height of the middle level, Niceone-tech generally recommends shrapnel between 280-420G first. If the panel is thick and not embossed, then we would recommend using heavier shrapnel.
Structure:
Shrapnel is usually made of stainless steel, nickel-plated or gold-plated. Some shrapnels have a lifespan of up to 5,000,000 times. It can also last for a long time when used in outdoor environments. At the same time, the resistance of nickel-plated and gold-plated shrapnel is lower than that of stainless steel Dome.
Life cycle:
The life span of shrapnel is generally: 100,000-5,000,000.
On this basis, we can use Dome sheets or dome arrays, so that a large number of shrapnel can be installed on the printed circuit board at one time, simplifying the assembly process. It can be said to be one of the solutions for quickly assembling membrane switches.
The structure is usually 0.75mm Mylar+0.05PET+Dome. After placement, it is directly mounted on the printed circuit board to simplify the assembly process. It can be said to be one of the solutions for quickly assembling membrane switches.
Niceone-tech's investment in surface mount technology enables the output of products to be accurate and fast to mount the shrapnel, and will not cause double shrapnel phenomenon to prevent the sudden stacking of shrapnel load. And the cost is lower and the benefit is higher.
If you need to send samples, please contact
Send product request
Other supplier products
 |
Silver Flex Membrane Switches | The most common structure in custom Flex membrane switches is Silver Flex Membrane Switches. The conductive ink, carbon oil, and UV ink are printed... |
 |
MEMBRANE SWITCHES | Membrane switch products are simply a part of electronic equipment and are often regarded as user interfaces or human-machine interfaces, making it... |
 |
Silver Flex Membrane Switches | Niceone-tech is a professional (HMI)human machine interface control modulemanufacturer. Niceone-tech has always been people-oriented, and should co... |
 |
FPC Membrane Switch | Flexible & rigid membrane switch assemblies (FPC membrane switch, silver flex membrane switches, and PCB membrane switch). Niceone-tech customi... |
 |
Capacitive Membrane Switch | Capacitive membrane switchis a special kind of membrane switch. There is no dome in the product, and the tactile feedback is also poor. It is a bit... |
Same products
 |
FT wax used for EVA-based hot melt adhesive | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | Seller: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | Seller: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19A | Seller: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | Seller: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
