Fuel Filter
Filton fuel filters are featured with high efficiency of filter medium and filter accuracy. It owns optimal filtration and water separation functions that can help to improve fuel cleanliness and fuel efficiency. Good raw material offers a longer replacement cycle and longer service life. It can effectively protect engine performance, reduce wear and tear and reduce maintenance costs.
HOW OFTEN SHOULD YOU CHANGE THE FUEL FILTER?
There are different types of auto fuel filters. For example, the fuel filterof Mazda 6 is a built-in type, which is linked with the gasoline pump; while the fuel filter of Geely Boyue is an external type, which can be directly observed from the chassis, so the replacement cycle of external and internal fuel filters must be different. Generally, the replacement cycle of the external fuel filter is about km, while that of the automotive fuel filteris between km. It is generally not recommended to replace it at 100000 km. After all, it is the part where the fuel is filtered, so there is no need to support it for too long.
HOW DO YOU KNOW WHEN FUEL FILTER NEEDS CHANGING?
First, when the power of the car engine drops. Even if the blockage degree of the gasoline filter is relatively light, it has a great impact on the engine power, especially when it is uphill or overloaded. If your fuel filter has not been replaced for a long time at this time, you should consider whether this is the reason.
Second, when the car is hard to start. Sometimes the blockage of a fuel filterwill make it difficult for the fuel to atomize, which makes it difficult for the car to start when it is cold, and the ignition can be done only after many times.
Third, when the engine is shaking at idle speed. If other reasons are eliminated, it can be judged that the fuel filter is blocked, and the blockage of the fuel filter will make the fuel not be fully atomized, so the phenomenon of shaking at idle speed will occur.
Fourth, when you feel like a car is shrugging. If the fuel filter is seriously blocked, the phenomenon of shrugging is very obvious when driving at ordinary times, especially when uphill.
As one of the automotive fuel filter manufacturers, Filton offers high quality fuel filter for sale, if you wan to know more information about price for fuel filteror car fuel filter price, please contact us.
Send product request
Other supplier products
 |
Air Filter LW-1045 | Filton LW-1045Air Filter for GETZ (TB) 1.6 Black PP panel hyundai getz air filter. The OE NO is OK2A513Z40A. The filter material is added with a d... |
 |
Air Filter LW-380 | Filton LW-380Air Filter for GETZ (TB) 1.3 i Non woven fabric panel CarAir Filter for HYUNDAI. The OE NO is MD620837. The filter material is added ... |
 |
Fuel Filter | Different Types of AutoFuel Filters Filton automotive fuel filtersare featured with high efficiency of filter medium and filter accuracy. It owns ... |
 |
Filton Filter Air Filter LW-533 Filton LW-533Air Filter for B-SERIE (UN) 2.5 D 4WD | Non woven fabric panel CarMAZDA air filter. The OE NO is SW606023. The filter material is added with a dipping process than the ordinary hot-rolled... |
 |
LW-1227 | Air Filter LW-1227 Filton LW-1227Air Filter for 3 (E46) 318 i Black PP panel bmw e46 cabin air filter. The OE NO is . The filter material is adde... |
Same products
 |
FT wax used for EVA-based hot melt adhesive | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | Seller: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | Seller: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19A | Seller: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | Seller: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
