G1 Solar Cell
G1 solar cell sizeplays an important role in the first unified standard size of monocrystalline percin the module. G1 solar cell size is 158.75mm, which has the advantages of lower production costs, higher power, and higher acceptance of the cell side on the premise of specsquare monocrystalline silicone sheet with thickness and diagonal line.
Sunrise Energy selected global high-quality G1 cells, equipped with non-destructive scratches, 9BB half cell, precision encapsulation, and other technologies, which can achieve the power of 415W.
High Precision , High Flatness Screen Printing
Solar Cells with high welding ability, optimized template design, zero defect appearance
Advanced PECVD Film
MBB solar cell with silicon nitride anti-reflective coating. Uniform navy blue
Perfect Texturing
MBB solar cellwith monocrystal pyramid pattem surface and polycrystalline silicon volute pattern surface High nucleation density, large receiving area, low reflectivity
Sophisticated Warranty
MBB solar cell with parallel resistance test to reduce hot spot effect and test weak light response Precise and efficient selection of chips, sorted into 12 levels according to the power of a single chip, Accuracy up to + 0.1% Appearance sorting to ensure that all cells in the assembly are similar in color
G1 solar cell size is 158.75-158.75mm. The dicing process in perc modulesproduction is divided into full and half. There are 5BB and 9BB. The appearance of Sunrise selection is zero defects. G1 solar cell size mono cell with higher welding ability, considering cell efficiency, production yield, and market analysis, it is confirmed that 9BB is the best solution. Innovative bifacial mono perctechnology and 9BB design shorten the current transmission distance and reduce the resistance loss. So that the conversion efficiency of the MBB solar cell can be improved, and the impact on the performance of the module is reduced.
9BB P-type perc bifacialcan contribute up to 30% of the gain in the module power generation process. The half-cut cell technology has higher conversion efficiency than the full cell and has a lower rated operating temperature. Compared to the full cell module, the half cell module temperature is 2-3 degrees lower, and the hot spot temperature is 10-20 degrees lower. At the same time, MBB solar cell has a lower shadow mask loss.
It has better IAM performance than conventional flat ribbons when light is incident. The 9BB with a smaller ribbon design can reduce the impact of stress. Make the module resistant to high and low-temperature performance and mechanical load performance.
Applications of the G1 Solar Cells
G1 cell is mainly used in 120, 132, 144 cell solar modules. It is representative of small size modules. The G1 module is encapsulated by Sunrise G1 solar cell with power up to 415w, and also provide full black, double glass and bifacial, half cell and other customization.
As one of solar energy product manufacturers, we have types of crystalline solar cellsfor sale, anything you need, please leave us a message.
Send product request
Other supplier products
 |
Off Grid Industrial Solar Panels | The commercial off grid solar systemsbased on module design is also more widely used. It consists of solar modules, controllers, inverters, battery... |
 |
M10 Solar Cell | M10 Solar Cell M10 cell, compared with the existing product span, equipment, process, auxiliary material maturity, production line upgrading diffi... |
 |
OFF GRID SOLAR PANELS | Off Grid Solar Panels The sales of off-grid systems mainly include photovoltaic modules, batteries, inverters, brackets and cables, combiner boxes... |
 |
P-TYPE M10 SERIES MODULES | Sunrise P-type M10 full black solar module- Aquaman series, using 182mm monocrystalline cells, module output power 350-565w, with four versions of ... |
 |
PV System | PV SYSTEMS On Grid PV system Self-generation, surplus power online, monthly income from electricity sales, 20%-25% higher than the bank interes... |
Same products
 |
MONSA® DDAC-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: MONSA® DDAC-50 It functions by causing the cell membrane of bacteria to rupture... |
 |
MONSA® DCA-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: disodium cocoampho diacetate Disodium cocoamphodiacetate for skinis a very mild amp... |
 |
MONSA® CTAC-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride Cetyl Trimethyl Ammonium Chloride is an ammonium ... |
 |
MONSA® CTAC-30 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride 30% Cetyltrimethyl ammonium chloride30% is mainly... |
 |
Common Rail Injector | Seller: DIP (DIESEL INJECTION PARTS) PLANTS | Item: Diesel Fuel Injector Model No: MOQ: 1pc Material: SteelPackage Deta... |
