30000W Multi-module CW Fiber Laser
RFL-C30000XZ
The Multi-module CW Fiber Lasers developed by Raycus ranges from 3,000W to 30kW, with high electro-optical conversion efficiency, high light beam quality, high energy density, wide modulation frequency, high reliability, long service life, maintenance-free operation and advantages. The product can be widely applied in welding, precision cutting, melting and cladding, surface processing, 3Dprinting and other fields. Its optical output performance helps it better integrate with robots as a flexible manufacturing equipment to meet 3D processing requirement.
Customer service hotline: to 8137
Online consultation +
Product specification
Characteristics of 30kw fiber laser
Technical characteristics
High Electro-optical Conversion EfficiencyCustomized Output Fiber LengthOutput cable:QPMaintenance-free OperationWide Modulation Frequency RangeSmall Size, Easy to Install
Optical Properties
Average output power: (W): 30000Central wavelength: (nm): 1080±5Maximum modulation frequency: (kHz): 2Output power stability: ±1.4%Red laser: Yes
Output characteristics
Output connector: QPoutput fiber core diameter (μm): 150BPP（mm.mrad)≤7polarization state: randomoutput fiber length (m): ≤20
Electronic control characteristics
Input power (V AC ): 323-436, Three Phase-four Wire Connect.@47-63HzControl mode: RS232, ADpower adjustment range (%): 10-100
Other characteristics
Dimensions (mm ): 1320*1220*1600(handle included)Weight (kg): <1200Cooling method: water coolingWorking temperature (℃ ): 10-40
Application Of 30000W Multi-Module CW Fiber Laser RFL-C30000XZ
CuttingWeldingCladding3D Printing/SinteringSurface Treatment
As a 1kw fiber laser factory, Wuhan Raycus Fiber Laser Technologies Co., Ltd. (hereinafter referred to as "Wuhan Raycus") is the first Chinese enterprise engaged in the research, development and scale production of high-power fiber lasers and core devices and the largest fiber laser R&D and production base with global influence in China.
Send product request
Other supplier products
 |
1000W Single Module CW Fiber Laser | RFL-C1000 The third-generation single module CW fiber laser series developed by Raycus ranges from 300W to 3,000W, the new fiber laser source 1kwh... |
 |
20000W Multi-module CW Fiber Laser | RFL-C20000TZ The Multi-module CW Fiber Lasers developed by Raycus ranges from 3,000W to 30kW, with high electro-optical conversion efficiency, hig... |
 |
Fiber Lasers | Wuhan Raycus Fiber Laser Technologies Co., Ltd. (hereinafter referred to as “Wuhan Raycus”) is the first Chinese enterprise engaged in ... |
 |
200W Fiber Delivered Direct Diode Lasers | RFL-A200D Medium powered fiber delivered direct diode laser is mainly used for heat conduction welding with low material thickness. With heat cond... |
 |
20W Q-Switched Pulse Fiber Laser | RFL-P20QE The 20-100W Q-Switched Pulse Fiber Laser Series developed by Raycus is the industrial marking and micromachining laser. This series pulse... |
Same products
 |
FT wax used for EVA-based hot melt adhesive | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | Seller: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | Seller: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19A | Seller: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | Seller: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
