Carbon Seal
Mechanical carbon sealhas a long history. Graphite is an isoform of element carbon. In 1971, the United States studied the successful flexible graphite sealing material, which solved the leakage of atomic energy valve. After deep processing, the flexible graphite becomes an excellent sealing material, which are made into various carbon mechanical sealwith the effect of sealing components. These carbon shaft sealare used in chemical, petroleum, electric power industries such as high temperature fluid seal.
Because the flexible graphite is formed by the expansion of expanded graphite after high temperature, the amount of intercalating agent remaining in the flexible graphite is very small, but not completely, so the existence and composition of the intercalation agent have a great influence on the quality and performance of the product.
Selection of Carbon Seal Material
The original inventor used concentrated sulfuric acid as oxidant and intercalating agent. However, after being applied to the seal of a metal component, a small amount of sulfur remaining in the flexible graphite was found to corrode the contact metal after long term use. In view of this point, some domestic scholars have tried to improve it, such as Song Kemin who choosed acetic acid and organic acid instead of sulfuric acid. acid, slow in nitric acid, and lower the temperature to room temperature, made from a mixture of nitric acid and acetic acid. By using the mixture of nitric acid and acetic acid as the inserting agent, the sulfur free expanded graphite was prepared with potassium permanganate as oxidant, and acetic acid was slowly added to nitric acid. The temperature is reduced to room temperature, and the mixture of nitric acid and acetic acid is made. Then the natural flake graphite and potassium permanganate are added to this mixture. Under constant stirring, the temperature is 30 C. After reaction 40min, the water is washed to neutral and dried at 50~60 C, and the expanded graphite is made after high temperature expansion. This method achieves no vulcanization under the condition that the product can reach a certain volume of expansion, so as to achieve a relatively stable nature of the sealing material.
Specification of Carbon Ring Seal
Sealcon can produce different carbon ring seals according to different customers’ requirement.
model |
M190T |
M106K |
M180K |
M106D |
M160C |
M160B |
material |
pure graphite |
furan resin |
furan resin |
antimony carbon |
copper alloy |
Babbitt alloy |
density (g/cm3) |
||||||
Fractural strength |
100 |
65 |
80 |
65 |
80 |
65 |
(MPa) |
||||||
compressive strength (MPa) |
250 |
230 |
240 |
200 |
250 |
160 |
Shaw hardness |
92 |
90 |
90 |
80 |
75 |
60 |
porosity (%) |
2 |
8 |
||||
Coefficient of heat |
6 |
|||||
expansion (1/℃) |
||||||
temperature (℃) |
600 |
210 |
210 |
350 |
350 |
200 |
medium |
concentration% |
pure graphite |
furan resin |
antimony |
copper alloy |
Babbitt alloy |
hydrochloric acid |
36 |
+ |
0 |
- |
- |
- |
sulfuric acid |
50 |
+ |
0 |
- |
- |
- |
sulfuric acid |
98 |
+ |
+ |
- |
- |
- |
nitric acid |
50 |
+ |
0 |
- |
- |
- |
nitric acid |
strong |
- |
- |
- |
- |
|
hydrofluoric acid |
40 |
+ |
0 |
- |
- |
- |
phosphoric acid |
85 |
+ |
+ |
- |
- |
- |
chromic acid |
10 |
+ |
0 |
- |
- |
- |
acetic acid |
36 |
+ |
0 |
- |
- |
- |
sodium hydroxide |
50 |
+ |
+ |
- |
- |
+ |
potassium hydroxide |
50 |
+ |
0 |
- |
- |
+ |
sea water |
+ |
+ |
+ |
+ |
+ |
|
benzene |
100 |
+ |
0 |
+ |
+ |
- |
ammonia |
10 |
+ |
+ |
+ |
+ |
- |
acetone |
100 |
+ |
+ |
+ |
0 |
+ |
carbamide |
+ |
+ |
+ |
0 |
- |
|
carbon tetrachloride |
+ |
+ |
+ |
+ |
+ |
|
oil |
+ |
+ |
+ |
+ |
+ |
|
gasoline |
+ |
+ |
+ |
+ |
+ |
+ stable - unstable 0 middle (between stable and unstable)
Hangzhou Sealcon Fluid Machinery Co., Ltdis a professional carbon seal ring manufacturer, we provide china agitator, high quality mechanical sealand etc. For more information, please feel free to contact us!
Send product request
Other supplier products
Pump Spare Parts | Pump body:including suction chamber and the pressure chamber,water pump spare partsSuction chamber:its function is to allow the liquid to flow even... | |
Different Types of Water Pump Seals | Elastomer Rubber Bellow Mechanical Seals Developed with rubber bellow, this type of seal is widely used for water, oil and other light duties appli... | |
Analysis And Maintenance Scheme Of Leakage Point Of Mechanical Seal For Pump | Pump with a wide range of mechanical seals, different models, but there are five major leaks: Seal between sleeve and shaft; Seal between movable... | |
MECHANICAL SEALS FOR PUMP | Mechanical seal for pump is a kind of dynamic seal assembly, which is widely used on the rotating shaft. It is also known as the end seal. Consisti... | |
Flygt Mechanical Seals FSU-90 | Replacement for: FSU-90 upper parts for flygt 3230, 3500, 3501 pump FSU-90 upper parts for flygt 3300, 3305, 3310, 3311, 3312, 3350, 3351, 3355, ... |
Same products
MONSA® DDAC-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: MONSA® DDAC-50 It functions by causing the cell membrane of bacteria to rupture... | |
MONSA® DCA-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: disodium cocoampho diacetate Disodium cocoamphodiacetate for skinis a very mild amp... | |
MONSA® CTAC-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride Cetyl Trimethyl Ammonium Chloride is an ammonium ... | |
MONSA® CTAC-30 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride 30% Cetyltrimethyl ammonium chloride30% is mainly... | |
Common Rail Injector | Seller: DIP (DIESEL INJECTION PARTS) PLANTS | Item: Diesel Fuel Injector Model No: MOQ: 1pc Material: SteelPackage Deta... |