SPRAY FOAM GUN

Spray foam gun

In the process of spraying materials, spray foam gun is essential. The spray foam gun needs to mix the material quickly during the spraying process, which needs to be done at a very fast speed, because the bonded material begins to harden immediately. Therefore, no material can be retained in the foam gun for a long time. Excess material needs to be removed from the spray foam gun during the purging process.

Features of spray gun foam

Spray foam guns are important to the process of applying sprayed materials. They can mix the materials during the spraying process, which ensures high efficiency and prevents the combined materials from hardening due to remaining in the spray foam gun for a long time.

Advantages of spray foam gun

-lightweight;

-body made of aluminum with a metal trigger;

-great precision;

-flow control mechanism;

Spray foam gun provided by Zego spray gun factory has access to hard-to-reach areas. It also has large flow control knob, which secures the overall system. Besides, the nozzle is replaceable. The excellent design can prevent dripping.

Tips of spray foam gun

If you take care of it, it is a good tool. Follow the tips below:

-Protect the tip. Do not damage it. If you do not protect it carefully, it will begin to clog or leak.

-Wipe the tip after using. Avoid foam on the tip.

-If you use this upside down (can facing down) it will work for about 3 seconds and then start spraying gas only. This will make the can last a lot shorter and you will cause it to dribble and make it a pain in the butt to use.

Spray foam gun common fault and solutions

-Air bubbles appear in the gun pot

Cause 1：Car paint spray gunnozzle set is not tightly installed

Result: Air enters the paint channel and bubbles appear in the gun pot when spraying.

Solution: Tighten the nozzle.

Cause 2: Blockage behind the nozzle

Result: Paint residue prevents the nozzle from sealing 100% with the air diverter ring.

Solution: Clean the nozzle carefully.

Cause 3: Damage to the surface of the air diverter ring

Result: Air entered the paint channel due to improper disassembly.

Solution: Replace the air diverter ring.

Cause 4: Clogging of gun pot venting hole

Result: Due to the vacuum, air will be sucked into the paint channel and bubbles will appear first and then the paint will leak.

Solution: Clean the gun pot vent hole and replace the gun pot if necessary.

High Quality Spray Guns at Affordable Prices

Cleaning Kit

TA501

TH101AG

TR200AG

If you have needs to buy spray gun, please leave us a message.

Other supplier products

	INDUSTRIAL SPRAY GUN	The industrial spray gunis specifically designed for automotive body and industrial work, providing excellent results and mirror-like paint effects...
	AIR HOPPER GUN	What is an air hopper spray gun? An air hopper spray gunis used for facilitating textured finishes for drywall-covered surfaces. With an air compr...
	CLEANING KIT	As one of the most professional spray gun suppliers, we provide automotive spray gun, spray gun kit for sale, paint sprayer cleaning kitand etc. Wa...
	AIR HOSE	Air Hose for Paint Gun THANK YOU FOR YOUR ATTENTION ON ZEGO ！ Please fill the form to let us know your need. Our sales will get in touch with you ...
	AIR DUSTER GUN	Air Duster Gun What is an air duster gun used for? There are many applications ofair compressor duster gunincluding blow-off drying after washing,...

All supplier products

Same products

	Microcrystalline wax 80A used for thickener	Seller: Syntop chemical Co.,Ltd.	Microcrystalline wax is a commonly used thickener, which mainly utilizes its characteristics of h...
	Microcrystalline wax used for rubber additive	Seller: Syntop chemical Co.,Ltd.	Microcrystalline wax has a wide range of industrial applications, primarily serving as a grease t...
	OPE WAX used for improving the wear resistance of the coating	Seller: Syntop chemical Co.,Ltd.	OPE wax has a wide range of applications, with its core value lying in its excellent internal and...
	Bamboo Thermos Flask	Seller: 865087	Yongkang Aijun Industry & Trade Co., Ltd. offers Bamboo Thermos Flask products combining a na...
	150TPD Wheat Flour Mill Plant	Seller: solve these problems	150TPD Wheat Flour Mill Plant CAPACITY: PROCESSING 150TONS WHEAT PER 24HOURS Struct...