AG-09 Magnetic Cylinder Sensor
AG-09 series switch magnetic sensor
The new AG-09 series is suitable for AIRTAC 7.1*3.2 L-slot cylinder and can replace AIRTAC DS1-J. The casing is reduced and optimized, which increases the layout space and avoids collision. It is the preferred magnetic switch sensor for short-stroke L-slot cylinders.
Specification of AG-09 sensor magnetic switch
|
Model |
AG-09 DF |
AG-09 N |
AG-09 P |
|
Switching Logic |
Normally Open |
Solid State Output, Normally Open |
|
|
Output Type |
2 Wire Solid State |
NPN Current Sinking |
PNP Current Sinking |
|
Voltage Range |
10～30V DC |
5～30V DC |
|
|
Sensor Current |
1～50 mA |
0～100 mA |
|
|
Switch Rating |
3W Max. |
||
|
Consumption |
/ |
3 mA Max.@24V |
|
|
Voltage Drop |
|||
|
Leakage Current |
90 μA Max.@28V |
||
|
Indicator |
Red LED |
Red LED |
Green LED |
|
Cable |
Φ2.8, 2C, Grey Oil-Resistant PVC |
Φ2.8, 3C, Grey Oil-Resistant PVC |
|
|
Sensitivity |
40～800 Gauss |
40～800 Gauss |
|
|
Sensor Frequency |
900Hz |
900Hz |
|
|
Temperature |
-10～70℃ |
-10～70℃ |
|
|
Shock |
50G |
50G |
|
|
Vibration |
9G |
9G |
|
|
Ingress Protection |
IP68 (GB/T4208-2017) |
IP68 (GB/T4208-2017) |
|
|
Protection Circuit |
Surge Suppression |
Power Reverse Polarity; Surge Suppression |
|
|
CE Certificate NO. |
E8A 17 04 53334 007 |
E8A 17 04 53334 008 |
|
|
CNEx Certificate NO. |
|||
|
RoHS 2011/65/EU & (EU) 2015/863 |
|||
|
Reach NO. |
(EC) N 1907/2006 (REACH) |
||
Features of AG-09 Magnetic Cylinder Sensor
The design of a smaller shell increases the flexibility of the equipment space layout.
The installation is placed on the top, which reduces the time required for the operator to install and disassemble.
Want to buy alif sensoror for more information, please feel free to contact us!
Send product request
Other supplier products
 |
AG-39 Magnetic Cylinder Sensor | AG-39 series magnetic sensor AG-39 series adopts special peak-shaped screws, which can be used for most brands of T-slot cylinders such as FESTO... |
 |
Magnetic Sensor Application | magnetic sensors are widely used in various actuator components such as cylinders, electric cylinders, and oil cylinders. You can find pneumatic ma... |
 |
PBI 18mm Sensor Bracket | Special for DFGE/AG-39 series, PBI 18mm Sensor Bracketis suitable for round cylinder below φ125. PBI 18mm Sensor Bracket Features Precise p... |
 |
AG-01 Magnetic Cylinder Pneumatic Reed Switch Sensor | AG-01 series pneumatic cylinder reed switch sensor The new AG-01 pneumatic reed switch sensor series is suitable for AIRTAC 4.35*4.5 square groove... |
 |
DFGJ Magnetic Cylinder Sensor | DFGJ series magnetic sensor DFGJ series L-slot cylinder specially used for AIRTAC 7.1*3.2, which can replace AIRTAC DS1-J; avoid equipment colli... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Seller: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Common Rail injector control valve F00VC01200 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Injector Control Valve Plate 24# | Seller: China Lutong Part Plant | Injector Control Valve Plate 24# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
 |
Injector Control Valve Plate 12# | Seller: China Lutong Part Plant | Injector Control Valve Plate 12# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
