SFP 1.25G Tx1490/Rx1310 40Km LC Transceiver
Gearlink’s SFP-GE-BX40 SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm FP laser (the 1490nm DFB laser), and the PIN/TIA. The module data link up to 40km in 9/125um Single-mode fiber.
This transceiver meets the Small Form Pluggable (SFP) industry-standard package utilizing an integral LC-Bi-directional optical/bidi transceiverinterface connector. An enhanced Digital Diagnostic Monitoring Interface compliant with SFF-8472 has been incorporated into the transceiver. It allows real-time access to the transceiver operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power, and transceiver supply voltage by reading a built-in memory with an I²C interface.
The optical output can be disabled by an LVTTL logic high-level input of Tx Disable, and the system also can disable the module via I²C. Tx Fault is provided to indicate the degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of the receiver or the link status with the partner. The system can also get the LOS (or Link)/Disable/Fault information via I²C register access.
Compatibility of SFP 1.25G Tx1490/Rx1310 40Km LC Transceiver
HUAWEI
LE2MGSC40DE01000BASE TX:1490nm/RX:1310nm 40km
Technical Specification Of SFP 1.25G Tx1490/Rx1310 40Km LC Transceiver
General Specifications
|
Parameter |
Symbol |
Min |
Max |
Unit |
|
|
Bit Rate |
BR |
Gb/sec |
|||
|
Max |
40 |
km |
Absolute Maximum Ratings
|
Parameter |
Symbol |
Min |
Max |
Unit |
||
|
Storage Temperature |
TS |
-40 |
85 |
ºC |
||
|
Storage Ambient Humidity |
HA |
5 |
95 |
% |
||
|
Power Supply Voltage |
VCC |
-0.5 |
4 |
V |
||
|
Signal Input Voltage |
-0.3 |
Vcc+0.3 |
V |
|||
|
Receiver Damage Threshold |
+3 |
dBm |
||||
|
Lead Soldering Temperature/Time |
Told |
260/10 |
ºC/sec |
Note 1 |
||
|
Lead Soldering Temperature/Time |
Told |
360/10 |
ºC/sec |
Note 2 |
Notes:
Parameter Of SFP 1.25G Tx1490/Rx1310 40Km LC Transceiver
Bidi TransceiverOptical Communication Module
Technical Documents Of SFP 1.25G Tx1490/Rx1310 40Km LC Transceivers
SFP 1.25G Tx1490/Rx1310 40Km LC Transceiver Pdf
Related 1.25G SFP Transceiver Products
SFP 1.25G Tx1490/Rx1310 10Km LC Transceiver SFP 1.25G Tx1490/Rx1310 10Km LC Transceiver More
SFP 10/100/1000Base-TRJ45 Transceiver SFP 10/100/1000Base-TRJ45 Transceiver More
SFP 1.25G Tx1550/Rx1490 80Km LC Transceiver
As a reliable optical module supplier, we will do our best to meet all the needs of customers.
Send product request
Other supplier products
 |
SFP28 25G 850nm 100m DDM LC Transceiver | GJS1L0C85 supports the 2-wire serial communication protocol defined in SFF-8472, which accesses digital diagnostic information via a 2-wire interfa... |
 |
SFP 155M Tx1550/Rx1310 20Km LC Transceiver | The SFP-BIDItransceivers are high-performance, cost-effective modules supporting a dual data rate of 155Mbps and a 20km transmission distance with ... |
 |
QSFP+ 40G 850nm XXm AOC | The Gearlink’s QSFP+ active optic cables are high performance, low power consumption, long reach interconnect solution supporting InfiniBand ... |
 |
QSFP 40G 1310nm 10km MPO Transceiver | 40G QSFP 1310nm 10km MPO is a parallel 40Gb/s Quad Small Form-factor Pluggable (QSFP+) optical module. It provides increased port density and total... |
 |
SFP 155M 1550nm 80Km LC Transceiver | GearLink’s 100M SFP optical fibre transceiverGAS7L0C31 is a small pluggable transceiver module based on the SFP multi-source agreement (MSA).... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Seller: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Common Rail injector control valve F00VC01200 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Injector Control Valve Plate 24# | Seller: China Lutong Part Plant | Injector Control Valve Plate 24# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
 |
Injector Control Valve Plate 12# | Seller: China Lutong Part Plant | Injector Control Valve Plate 12# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
