.

SFP 1.25G Tx1490/Rx1550 80Km LC Transceiver

Gearlink’s GCS7L0C45 SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1490nm DFB laser (the 1550nm DFB laser), and the PIN/TIA. The module data link up to 80km in 9/125um Single-mode fiber.

This transceiver meets the Small Form Pluggable (SFP) industry-standard package utilizing an integral LC-Bi-directional optical and sfp bidi multimodeinterface connector. An enhanced Digital Diagnostic Monitoring Interface compliant with SFF-8472 has been incorporated into the transceiver. It allows real-time access to the transceiver operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power, and transceiver supply voltage by reading a built-in memory with an I²C interface.

The optical output can be disabled by an LVTTL logic high-level input of Tx Disable, and the system also can disable the module via I²C. Tx Fault is provided to indicate the degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of the receiver or the link status with the partner. The system can also get the LOS (or Link)/Disable/Fault information via I²C register access.

Get Free Quote

Compatibility of SFP 1.25G Tx1490/Rx1550 80Km LC Transceiver

Cisco

Juniper

GLC-BX80-U-I1000BASE-BX80-U-SMF TX:1490nm/RX:1550nm 80km

Technical Specification Of SFP 1.25G Tx1490/Rx1550 80Km LC Transceiver

General Specifications

Parameter

Symbol

Min

Max

Unit

Bit Rate

BR

Gb/sec

Max

80

km

Absolute Maximum Ratings

Parameter

Symbol

Min

Max

Unit

Storage Temperature

TS

-40

85

ºC

Storage Ambient Humidity

HA

5

95

%

Power Supply Voltage

VCC

-0.5

4

V

Signal Input Voltage

-0.3

Vcc+0.3

V

Receiver Damage Threshold

+3

dBm

Lead Soldering Temperature/Time

Told

260/10

ºC/sec

Note 1

Lead Soldering Temperature/Time

Told

360/10

ºC/sec

Note 2

The series of products owned by WuhanGearLink fiber optic transceiver supplieris widely used in data centers, cloud computing, 5G networks, and other optical communications fields, including a full range of 400G/100G/40G/25G/10G/AOC/DAC, etc. We will continue to increase investment in the research and development center, improve the existing product system, meet the various needs of customers, and become the most trusted strategic partner of customers!


Send product request

To: Wuhan Gearlink Technology Co., Ltd.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

25G SFP28 CWDM 1270-1330 40km DDM Transceiver
25G SFP28 CWDM 1270-1330 40km DDM Transceiver The 25g cwdmis widely used in 25G Ethernet and 5G front haul CPRI/eCPRI, with a transmission distance of up to 10km or 15km through a pair of singl...
DAC Direct Attach Cable
DAC Direct Attach Cable The DAC high-speed cable is a fixed-length cable assembly with fixed connectors at both ends. The connectors of dac fiber cablehave no optical lase...
25G SFP28 Transceiver
25G SFP28 Transceiver 25G optical transceiverhas a transmission rate of 25Gbps, which is mainly used for the interconnection of data center servers and switches. The bes...
SFP 155M 1550nm 80Km LC Transceiver
SFP 155M 1550nm 80Km LC Transceiver GearLink’s 100M SFP optical fibre transceiverGAS7L0C31 is a small pluggable transceiver module based on the SFP multi-source agreement (MSA)....
SFP 155M Tx1310/Rx1550 40Km LC Transceiver
SFP 155M Tx1310/Rx1550 40Km LC Transceiver The BIDI SFP transceivers are high-performance, cost-effective modules supporting dual data-rate of 155Mbps and 40km transmission distance with SMF...
All supplier products

Same products

Beeswax used for candle processing
Beeswax used for candle processing Seller: Syntop chemical Co.,Ltd. The advantages of beeswax candles are quite notable: Natural ingredients: Beeswax is a natural s...
Greentech GR220 Electric Star Feeder | Rotary Airlock Valve Seals for Pneumatic Conveying Systems 6 Months Warranty 310kg
Greentech GR220 Electric Star Feeder | Rotary Airlock Valve Seals for Pneumatic Conveying Systems 6 Months Warranty 310kg Seller: Greentech International (Zhangqiu) Co., Ltd Customized Support: Tailored solutions for industrial machinery needs. High-Quality Electric P...
Bottle Cap Mold
Bottle Cap Mold Seller: Taizhou Qihong Mold Co., Ltd. Bottle Cap Mold is designed for precise and consistent plastic cap production, supporting differe...
High quality beeswax used in craft production
High quality beeswax used in craft production Seller: Syntop chemical Co.,Ltd. Beeswax has a wide range of uses in handicrafts, appearing in everything from traditional candles...
FT wax used for EVA-based hot melt adhesive
FT wax used for EVA-based hot melt adhesive Seller: Syntop chemical Co.,Ltd. Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for...