8 INCH C-PLANE(0001) SAPPHIRE WAFERS
8 INCH C-PLANE(0001) SAPPHIRE WAFER
The 8-inch sapphire wafers can enable chip makers to roll out more productivity, which will help them drive down costs dramatically.
CRYSCORE is qualified to supply 8-inch epi-ready sapphire wafers. The common thickness is 1300 μm and 1500 μm.
Generally, this series of polished sapphire wafer has a notch instead of a major flat, but flat with custom length is also available. Our sapphire wafers are cleaned in class 100 cleanroom by ultrapure water with quality above 18MΩ *cm, and then packed in clean cassettes.
Specifications of 8 Inch C-plane(0001) Sapphire Wafers
|
Item |
8-inch C-plane(0001) 1300μm Sapphire Wafers |
|
|
Crystal Materials |
99,999%, High Purity, Monocrystalline Al2O3 |
|
|
Grade |
Prime, Epi-Ready |
|
|
Surface Orientation |
C-plane(0001) |
|
|
C-plane off-angle toward M-axis 0.2 +/- 0.1° |
||
|
Diameter |
||
|
Thickness |
1300 μm +/- 25 μm |
|
|
Single Side Polished |
Front Surface |
Epi-polished, Ra < 0.2 nm (by AFM) |
|
(SSP) |
Back Surface |
Fine ground, Ra = 0.8 μm to 1.2 μm |
|
Double Side Polished |
Front Surface |
Epi-polished, Ra < 0.2 nm (by AFM) |
|
(DSP) |
Back Surface |
Epi-polished, Ra < 0.2 nm (by AFM) |
|
TTV |
< 30 μm |
|
|
BOW |
< 30 μm |
|
|
WARP |
< 30 μm |
|
|
Cleaning / Packaging |
Class 100 cleanroom cleaning and vacuum packaging, |
|
|
25 pieces in one cassette packaging or single piece packaging. |
||
Note: Custom sapphire wafers with any orientation and any thickness can be provided.
CRYSCORE OPTOELECTRONIC LIMITED has been a professional manufacturerspecialized in high-quality sapphire wafers and optical windows since 2008. We provide sapphire optics,sapphire rod, sapphire ingot, Al2O3 substrateand etc. Want to know sapphire wafer priceor more? Please contact us.
Send product request
Other supplier products
 |
Standard Sapphire Wafers (C-plane) | As a professional sapphire wafermanufacturer, CRYSCORE can provide standard or optical sapphirewafers with any orientation applied to epitaxy, as w... |
 |
STANDARD SAPPHIRE WAFERS (C-PLANE) | CRYSCORE can offer Epi-Ready grade sapphire wafer with a very low surface roughness in complete orientation options. c plane sapphirewafers are bei... |
 |
PATTERNED SAPPHIRE SUBSTRATES | Sapphire wafer is the most widely used substrate material in semiconductor lighting industry, and patterned sapphire substrate(PSS) is the general ... |
 |
SAPPHIRE WAFERS / SAPPHIRE SUBSTRATES | Due to the less mismatched lattice and stable chemical and physical properties, sapphire(Al2O3) wafer is the popular substrates for III-V nitrides,... |
 |
CUSTOM SAPPHIRE WAFERS | CRYSCORE supplies sapphire wafers with the high-quality surfaces in all orientations (C-planesapphire, A plane sapphire, R-planesapphire, M plane s... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Seller: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Common Rail injector control valve F00VC01200 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Injector Control Valve Plate 24# | Seller: China Lutong Part Plant | Injector Control Valve Plate 24# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
 |
Injector Control Valve Plate 12# | Seller: China Lutong Part Plant | Injector Control Valve Plate 12# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
