DUPLEX STEEL PIPE/TUBE
The microstructure of duplex seamless pipeis approximately 50% ferrite (body-centered cubic structure) and 50% austenite (face-centered cubic structure) crystal structure. The two phases coexist as a stable mixture, but this is different from two-phase alloys, where one of the two phases appears as a precipitate. The alloying elements in duplex stainless steel tubes are ferritic (eg chromium, silicon, molybdenum) or austenitic (eg carbon, nickel, nitrogen), which means that they favor the formation of the ferritic and austenitic phases, respectively. As a professional duplex stainless steel pipe manufacturer in China, Yuhong Group provides quality super duplex tubing solutions.
DIFFERENT TYPES OF DUPLEX STEEL PIPE
Duplex stainless pipeare part of the stainless steel family. Duplex( austenitic-ferritic) means their metallurgical structure consists of two phases. Compare with the normal 304 316 stainless steel, they can provide better corrosion resistance, particularly chloride stress corrosion and chloride pitting corrosion, and higher strength. And it has higher Chromium 20%-28%, and lower nickel, up to 9% and 0.05-0.50% than austenitic stainless steel, which gives good cost benefits.
DUPLEX STAINLESS STEEL PIPE GRADES
The most widely used is ASTM ASTM (American Society for Testing and Materials International), and ASME(American Society of Mechanical Engineers). And the general standard for the duplex stainless steel seamless or welded tube or pipe can be ASTM A789/ASME SA789, ASTM A790/ASME SA790, ASTM A928/ASME SA928. They give very detailed requirements on the material, test, and others.
DUPLEX SS SEAMLESS PIPE APPLICATIONS
Pipe duplexis known for its excellent combination of good mechanical properties and high corrosion resistance. The wide range of advantages means that it can be used in many different applications: for example, chemical processing, transport, and storage in the industrial sector, such as seawater heat exchange for high chloride environments and production of chemical containers. The SS duplex pipe can also be applied to pipelines for oil and gas production and transportation, such as oil and gas exploration and offshore drilling platforms.
Nickel alloys are the most outstanding and useful materials in the manufacture of pipes and tubes for industrial applications. Their inherent properties make them versatile. Nickel alloys are particularly resistant to corrosion and can be used in high-temperature environments. Because nickel alloys are highly ductile, they can be processed very efficiently into pipes and tubes while maintaining the corresponding strength. This makes them ideal for heat exchangers in chemical processing. Nickel-based tubing is also used in steam generators, aircraft systems, and oil and gas extraction.
DUPLEX STEEL PROPERTIES
At elevated temperatures, mechanical properties such as strength and toughness, as well as corrosion resistance, of dual-phase steels are reduced. This phenomenon is called embrittlement. The worst temperature at which embrittlement occurs is 475 °C; however, the formation of α' phases can begin to occur at temperatures as low as 300 °C, which limits the maximum service temperature for dual-phase steels.
Typical duplex pipe materialhas higher yield strengths than typical martensitic, austenitic, and ferritic stainless steels. However, since intermetallics begin to precipitate above 300 °C and become brittle near cryogenic temperatures, their operating temperature range is narrow.
There are many ss pipe suppliers, but we are one of the best choices for you.
Send product request
Other supplier products
 |
ASTM B338/ ASME SB338 TITANIUM ALLOY STEEL TUBE | ASTM B338/ ASME SB338Titanium Tube (Ti Tube) has a superior strength-to-weight ratio and corrosion resistance is one of the common titanium product... |
 |
GR.1 TITANIUM ALLOY STEEL TUBE | ASTM B338 and ASME SB338 seamless and welded titanium and titanium alloytubes for condensers, and heat exchangers, cover 28 grades of titanium and ... |
 |
STAINLESS STEEL PIPE/TUBE | STAINLESS STEEL PIPE/TUBE Stainless steel pipe/tube is one of the most widely used in manufacturing and fabrication. Seamless and welded are the c... |
 |
STEEL FITTING | STEEL FITTING Steel has been used for making pipe and pipe fittings for years for its durability and strength. Moreover, steel also offers high re... |
 |
MONEL 400/N04400 NICKEL ALLOY PIPE/TUBE | Monel N04400 Alloy is a Nickel-Copper alloy that is resistant to seawater and steam at high temperatures as well as to salt and caustic solutions. ... |
Same products
 |
MONSA® DDAC-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: MONSA® DDAC-50 It functions by causing the cell membrane of bacteria to rupture... |
 |
MONSA® DCA-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: disodium cocoampho diacetate Disodium cocoamphodiacetate for skinis a very mild amp... |
 |
MONSA® CTAC-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride Cetyl Trimethyl Ammonium Chloride is an ammonium ... |
 |
MONSA® CTAC-30 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride 30% Cetyltrimethyl ammonium chloride30% is mainly... |
 |
Common Rail Injector | Seller: DIP (DIESEL INJECTION PARTS) PLANTS | Item: Diesel Fuel Injector Model No: MOQ: 1pc Material: SteelPackage Deta... |
