Brass Ball Valve
The brass ball valves for wateris evolved from the cock. Its opening and closing part is used as a sphere, which uses the sphere to rotate 90° around the axis of the valve stem to achieve the purpose of opening and closing. The ball brass valve can cut off, distribute and change the flow direction of the medium, and the Carbo OEM brass valvealso has a good flow regulation function. As a professional brass valve manufacturer, we are committed to providing high-quality brass ball valve and services for customers. The different types include brass ball valve with drain, press ball valve and so on. If you want to buy brass ball valve and learn more about our brass ball valve specification and the brass ball valve price list, please feel free to contact us!
OEM Brass Ball ValveSpecification
|
Category 1 Code |
Category 2 Code |
Size |
Port Size |
|
1BVDa02-130 |
1BVDb02-130 |
1/4 |
|
|
1BVDa03-130 |
1BVDbO3-130 |
3/8 |
|
|
1BVDa04-130 |
1BVDb04-130 |
1/2 |
|
|
1BVDa06-130 |
1BVDb06-130 |
3/4 |
|
|
1BVDa08-130 |
1BVDb08-130 |
1 |
|
|
1BVFbO4-130 |
1BVFCO4-130 |
1/2 |
|
|
1BVFb06-130 |
1BVFc06-130 |
3/4 |
|
|
1BVFb08-130 |
1BVFcO8-130 |
1 |
|
|
1BVFb10-130 |
1BVFc10-130 |
||
|
1BVFb12-130 |
1BVFc12-130 |
||
|
1BVFb14-130 |
1BVFc14-130 |
2 |
|
|
1BVBc04-130 |
1BVBd04-130 |
1/2 |
|
|
1BVBc06-130 |
1BVBd06-131 |
3/4 |
|
|
1BVBc08-130 |
1BVBd08-132 |
1 |
|
|
1BVBc10-130 |
1BVBd10-133 |
||
|
1BVBc12-130 |
1BVBd12-134 |
||
|
1BVBc14-130 |
1BVBd14-135 |
2 |
|
|
1BVBb01-130 |
1BVBe01-130 |
1/8 |
|
|
1BVBb02-130 |
1BVBe02-130 |
1/4 |
|
|
1BVBb03-130 |
1BVBe03-130 |
3/8 |
|
|
1BVBb04-130 |
1BVBe04-130 |
1/2 |
|
|
1BVBb06-130 |
1BVBe06-130 |
3/4 |
|
|
1BVBb08-130 |
1BVBe08-130 |
1 |
|
|
1BVBb10-130 |
1BVBe10-130 |
||
|
1BVBb12-130 |
1BVBe12-130 |
||
|
1BVBb14-130 |
1BVBe14-130 |
2 |
|
|
1BVD002-130 |
/ |
1/4 |
|
|
1BVD003-130 |
/ |
3/8 |
|
|
1BVD004-130 |
/ |
1/2 |
|
|
1BVD006-130 |
/ |
3/4 |
|
|
1BVD008-130 |
/ |
1 |
How to Repair the Brass Ball Valves for Water?
Carbo, a professional brass ball valve factory, is here to provide you with several tips on repairing the brass ball valve. When the brass ball valve is leaking, you should first find out the cause of the brass check valve leakage and the specific location of the water leak. If the cause of the ball valve leak and the location of the water leak are different, the treatment method will be different, so we should repair according to the actual situation of the brass ball valve for water.
Repair the Brass Ball Valve2
If it is because the handle of the pex pipe ball valve is not closed properly, the ball valve cannot be closed tightly, and there is a water leakage problem, then the handle of the ball valve needs to be removed, and then the handle is corrected with pliers, and then the handle is installed back. Generally, water leakage problem can be solved.
Repair the Brass Ball Valve3
If it is because the valve core of the ball valve is rusted to death, the ball valve cannot be closed tightly, and there is a water leakage problem, then it is generally difficult to repair. You can only try to remove the ball valve, and then drop some lubricating oil into the valve core position. To see if the rust death problem can be solved. If the problem cannot be solved, then you can only directly replace with a new brass pressure reducer of the same specification and model.
Repair the Brass Ball Valve4
If the ball valve is damaged, it can only be replaced directly with a new ball valve. Before replacing the brass ball valve, you need to go to a hardware store or buy brass ball valve from China with the same specifications and model as the old ball valve online. If the owner will not replace the ball valve, it is best to ask a professional to come to help replace it, so as to avoid problems.
Repair the Brass Ball Valve5
Once the ball valve leaks, but the owner fails to repair or replace it in time, the water leakage of the ball valve will become more and more serious. Over time, it will affect the life of the owner and may also cause economic losses. So the advice of a professional bronze ball valve supplier is to make sure to repair the water leakage of the ball valve in time.
How to install a brass ball valve?
FIRST
Ensure that the installation position of the ball valve and the pipeline are in a coaxial position. The two flanges on the pipeline should be kept parallel. Confirm that the pipeline can bear the weight of the push ball valve. If it is found that the pipeline cannot bear the weight of the ball valve, provide corresponding support for the pipeline before installation.
SECOND
Confirm whether there are impurities, welding slag, etc. In the pipeline, and the it must be purged clean.
THIRD
Check the nameplate of the ball valve, and perform full-open and full-close operations on the ball valve for pex pipe several times to confirm that the valve can work normally, and then check all the details of the valve thoroughly to ensure that the valve is intact.
FOURTH
Remove the protective covers at both ends of the valve, check whether the valve body is clean, and clean the inner cavity of the valve body. Since the sealing surface of the brass water heater drain ball valve is spherical, even tiny debris may cause damage to the sealing surface.
Matters Needing Attention When lnstalling the Ball Valve
Any section of the ball valve can be installed at the upstream end, and the handle brass valve for water can be installed at any position of the pipeline. If the ball valve of the actuator (such as gear box, electro-pneumatic actuator) is configured, it must be installed vertically, and the inlet and outlet of the valve are on horizontal location.
As a professional brass valves manufacturer, we provide brass water heater drain ball valve, backwater valve, half inch pex ball valve, etc. Want to know or more, contact us.
Send product request
Other supplier products
 |
Bronze Check Valve | A bronze check valve is a type of automatic valve. The valve disc is pushed by the pressure of the flowing media in the pipeline to close and open ... |
 |
Cold Expansion Ball Valve | In the field of valves, cold expansion ball valve is a top-mounted new ball valvewith a thermal expansion and contraction compensation structure, i... |
 |
Carbo OEM Brass Valves | About Carbo Valves As a professional OEM brass valvesupplierand bronze valve factory, we can produce high-quality bronze valves and superior bra... |
 |
Pex Ball Valve | The half inch and 1 inch pex ball valve provided by Carbo, a professional pex ball valve factory, has good wear resistance. The reason for the OEM ... |
 |
Bronze Gate Valve | Bronze gate valve for saleuses bronze material, which has excellent wear resistance and corrosion resistance, good casting performance and airtight... |
Same products
 |
Cranberry Extract | Seller: Yongzhou Jingmu Biotechnology Co., Ltd. | Cranberries, predominantly grown in North America, contain unique proanthocyanidins that prevent ... |
 |
Silybum Marianum Extract | Seller: Yongzhou Jingmu Biotechnology Co., Ltd. | Milk thistle, also known as water flyweed or silybum marianum, is a plant in the Asteraceae famil... |
 |
Sophora Japonica Extract | Seller: Yongzhou Jingmu Biotechnology Co., Ltd. | Sophora Japonica Extract, derived from the flower of the Sophora japonica tree prevalent in China... |
 |
Ginseng Extract | Seller: Yongzhou Jingmu Biotechnology Co., Ltd. | Panax Ginseng Extract is meticulously extracted and refined from the roots, stems, and leaves of ... |
 |
Ginkgo Biloba Extract | Seller: Yongzhou Jingmu Biotechnology Co., Ltd. | Ginkgo Biloba Extract (GBE) is derived from the leaves of the Ginkgo biloba tree, which has been ... |
