Los Angeles Abrasion Tester (JTG E42)
Applicable standards:
JTG 3432-2024 "Aggregate Test Regulations for Highway Engineering" : The T0317-2005 Los Angeles method for coarse aggregate wear test in this standard specifies the specific requirements, test methods and data processing of the Los Angeles wear tester.
Main parameters:
Cylinder:
Inner diameter: 711mm±5mm
Length: 508mm±5mm
Wall thickness: 12.0mm±0.5mm
Feeding port （cylinder surface） width: 150mm±3mm
Cover width （may vary by model） : 190mm, etc
Bulkhead （may be equipped, depending on model） : Protrusion size, thickness, distance from edge, etc. are specified
Speed: The cylinder's speed is usually between 30r/min and 33r/min.
Counter: The number of counter bits is usually 4 or 5 bits, which can be automatically digital display and preset rotation times. Some models have a maximum set value of 9999 times or more.
Steel Ball:
Diameter: between 45.6mm and 47.6mm, the exact diameter may vary slightly depending on the test requirements.
Mass: The mass of a single steel ball is between 390g and 445g. The size and mass of a set of steel balls may vary slightly, but the average diameter and average mass must meet the specified requirements. The average diameter is 46.8mm and the average mass is about 420g.
Quantity: The number of steel balls in a set is usually 12, 15, or other specified quantity.
Working power supply: AC380V 50Hz AC power is usually used, and the power is about 1.5Kw.
Overall dimensions and weight:
Dimensions: May vary by model, such as 850mm×1100mm×1550mm, etc.
Weight: May vary by model and material, e.g. 320kg or so.
Send product request
Other supplier products
 |
Zipper Reciprocating Tester | IntroductionZipper reciprocating tester is used to measure the zipper performance of products with zippers, such as clothes, textiles, auxiliary ma... |
 |
Mask&Respirator Breathing Resistance Tester | The respiratory resistance tester is suitable for determining the inhalation resistance and exhalation resistance under the regulations of respirat... |
 |
45 degrees wire and cable burning instrument | Main technical parameters： Type: touch screen automatic Sample length: 600 ± 25mm Fuel: methane gas or gas （own） Flame application time:... |
 |
Wire bending tester | Product Introduction: Wire bending tester meets JIS-C-3005 test standard. The sample is inserted through the specified round hole according to thi... |
 |
Robot dust jacket | Product advantages： Dust preventi,Water repellent,Stain prevent,Wear resistanc; Application industry: Grinding process,Handling opera,Thermal ... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Seller: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Common Rail injector control valve F00VC01200 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Injector Control Valve Plate 24# | Seller: China Lutong Part Plant | Injector Control Valve Plate 24# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
 |
Injector Control Valve Plate 12# | Seller: China Lutong Part Plant | Injector Control Valve Plate 12# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
