PS 26-1017 PK Pigment Brown
Description
PS 26-1017 PK is a yellowish Zinc Ferrite. Its colour is comparable to iron oxide yellow.
It has excellent chemical resistance, outdoor durability, light fastness, heat stability and is non-bleeding and non-migratory. It is a all-purpose pigment, suggested applications include RPVC, Polyolefins, Engineering Resins.
Application
This pigment causes no warpage in injection-moulded or extruded parts – not even large ones. Its outstanding fastness ratings makes this pigment ideally expedient for plastics resistant to both weathering and heat, notably for shading as well as for mass tone. It make it particularly suitable for Paints and Coatings including General Industrial, Coil and Extrusion coatings. Another field of application are architectural finishes, both water- and solvent-based.
Physical properties
| Test method | ||
| Specific Gravity (g/cm3) | 4.60（±0.1） | DIN-ISO 787 part/Teil 10 |
| Oil Absorption (g/100g) | 20 | DIN-ISO 787 part/Teil 5 |
| Median size (µm) | 0.6 | Cilas Granulometer HR 850-B |
| Specific Surface (m2/g) | 5.7 | |
| pH | 5.5-7.0 | DIN-ISO 787 part/Teil 9 |
| Heat resistance | ＞500℃ | |
| Fastness to Light | ＞7 | DIN 54003 |
| Fastness to Weather | ＞4 | DIN 54001 |
| Sieve residue (325 mesh / 45µm) | ＜0.1% | DIN 53195 |
| Moisture | ＜0.5% | DIN-ISO 787 part/Teil 2 |
Product Specifications
| Mass Tone | Tint 1:3 | |||
| DL* | +/-0.8 | +/-0.8 | ||
| Da* | +/-0.8 | +/-0.8 | ||
| Db* | +/-0.8 | +/-0.8 | ||
| DE* | max. 1.0 | max. 1.0 | ||
| Colour Strength | +/-5.0% | |||
| (In CIE Lab-units, tested according to Ferro test procedure AA 10/53 (soft-PVC) in comparison to standard quality. Illuminant D65, 10°, SCI) | ||||
Send product request
Other supplier products
 |
One-component polyurethane moisture curing primer MT-85B | Product Description MT-85B one-component primer is a one-component polyurethane primer. MT-85B one-component primer cures by reacting in moist air... |
 |
Powder Coating for Automated Equipment | Automated Equipment Powder CoatingusingOutdoor Low-Cure and Ultra-Low-Cure Powder Coatingsis designed to enhance the durability, performance, and a... |
 |
Surface Finish Powder Coatings for Performance & Aesthetics | Surface That Performs & Impresses In today’s industrial design, appearance matters as much as performance. Our Powder Coatings by Surfac... |
 |
aliphatic polyisocyanate (flexible HDI trimer) curing agent STD-N 3800 | Product Types PIC HDI Isocyanate Polyisocyanurate Aliphatic polyisocyanate Crosslinkers Polyisocyanate Hardeners Material Coatings, paint... |
 |
Soft Starry Grey powder coating/ | Product Features With a special skin feel formula, the surface of the coating after powder solidification has a touch similar to that of the skin,... |
Same products
 |
(2RB110) Turbine Blower/Ring Blower/Blower/Low Noise Level | Seller: Greentech Industry (Jinan) Co., Ltd | Features:1. Beautiful surface2. Easy installation3. Low noise level4. No vibration, and therefore... |
 |
YL-Impeller aerator(1.5 kw) | Seller: Taizhou Jinhu Mechanical & Electrical Co., Ltd. | Taizhou Jinhu Mechanical & Electrical Co., Ltd. specializes in manufacturing reliable aeratio... |
 |
Microcrystalline wax specilized in rubber protection | Seller: Syntop chemical Co.,Ltd. | In rubber protection, microcrystalline wax primarily resists ozone aging through physical migrati... |
 |
Microcrystalline wax used for investment casting processing | Seller: Syntop chemical Co.,Ltd. | In candle and wax paper manufacturing, microcrystalline wax is primarily used as a modifyin... |
 |
Foldable Mobile Sugarcane Impurity Removing Equipment | Seller: Guangxi Hepu Huili Machinery Co.,Ltd | Foldable Mobile Sugarcane Impurity Removing Equipment Description: High-efficiency foldable mobi... |
