Le Chatelier Moulds/Le Chatelier Mould Apparatus
Le Chatelier Moulds Le Chatelier Mould Apparatus
The mould consists of a spring tensioned split sylinger 30 mm internal diameter ×30mm high with two indicator stems which measyres 165 mm from the points to the center line of the cylinder and O ring. Two or three moulds are required for each test.
Specifications: 1. Le chatelier mould 2. To determine soundness of cement 3. To check the state of the split cylinder of le chatelier mould
Other supplier products
|
|
150mm Steel Cube Mould |
150mm Steel Cube Mould : 4-part with clamp attached base plate. Cube mould for concrete hardened testing. Machined surface finished by flat grindin... |
|
|
ZC3-A Concrete Resiliometer |
ZC3-A Concrete Resiliometer is used for detecting the concrete compressive strength within the range of 10-60Mpa Technical parameter： 1.Length of p... |
|
|
QDX-17 The perforation resistance meter |
QDX-17 The perforation resistance meter Purpose: using heavy hammer falling from high impact PVC waterproofing materials, has determined its resist... |
|
|
The FBT-9 type full-automatic tester of specific surface area |
The FBT-9 type full-automatic tester of specific surface area Specific surface area analyser Blaine Air Permeability Apparatus According to the new... |
|
|
Soil Humidity and Density Test Apparatus |
Model WH-1 Soil Humidity and Density Test ApparatusApplication:used to test humidity rate and unit weight of original soil or humidity rate and uni... |
All supplier products
Same products
