PC Injection Molding

• 

PC is classified as a ''thermoplastic'', and the name has to do with the way the plastic responds to heat. Thermoplastic materials become liquid at their melting point (155 degrees Celsius in the case of Polycarbonat). A major useful attribute about thermoplastics is that they can be heated to their melting point, cooled, and reheated again without significant degradation. Instead of burning, thermoplastics is like Polycarbonate liquefy, which allows them to be easily injection molded and then subsequently recycled.

PC is commonly used for plastic lenses in eyewear, in medical devices, automotive components, protective gear, greenhouses, Digital Disks (CDs, DVDs, and Blu-ray), and exterior lighting fixtures.

Injection molding most often produces parts by polycarbonates and their blends. Since polycarbonate is highly viscous, it is usually processed at high temperature to reduce its viscosity. In this process, the hot polymer melt is pressed through into a mold with high pressure. The mold when cools, gives the molten polymer its desired shape and characteristics. This process is generally used to manufacture polycarbonate bottles, plates etc. Since polycarbonate is a poor-flowing plastic, wall thickness should not be too thin.

Properties of PC Injection Molding

Mechanical performance: high strength, fatigue resistance, dimensional stability, and small creep (also rarely changes under high temperature conditions);

Heat aging resistance: The enhanced UL temperature index reaches 120 ~ 140 ℃ (long-term outdoor aging is also very good);

Solvent resistance: no stress cracking;

Stability to water: easy to decompose under water at high temperature (use caution in high temperature and high humidity environment);

Insulation performance: excellent (moisture and high temperature can also maintain stable electrical performance, is an ideal material for manufacturing electronic and electrical parts);

Dielectric coefficient: 3.0-3.2;

Arc resistance: 120s;

Form ability: injection molding or extrusion of ordinary equipment.

We provide custom plastic injection molding china,polycarbonate injection,pc abs injection molding,molding polycarbonate,polycarbonate injection moldingand injection molded parts,you can consult us injection molding costand can polycarbonate be injection molded,contact us now.

Other supplier products

	Other Materials Molding	Other Materials Molding Here we list some other materials for plastic injection molding parts. PE, Polyethylene is a lightweight, durable thermopla...
	ABS Injection Molding	Plastic ABS resin is the polymer with the largest output and the most extensive application. It organically unifies the various properties of PB, P...
	Prototype Samples Making	Prototype samples of plastic injectionmolding products are basic working samples, mockups, models, or just simulations of actual products, and othe...
	Tool Building	As a good reputation manufacturer in China, we here share the basic injection mold making process in our company: Products design department provi...
	Medical Plastic Injection Molding	Feman medical parts are essential component of Feman tooling. There is special department in-house that only service for the medical customers. A t...

Same products

	ETH Ethereum Jasminer X4 BRICK ASIC Miner	Seller: Shenzhen Dovina Electronic Co.,Ltd	Jasminer X4 Brick Review Jasminer x4 brick for salefrom Jasminer mining EtHash algorithm with a ...
	ETH Ethereum Jasminer X4-1U ASIC Miner	Seller: Shenzhen Dovina Electronic Co.,Ltd	TheJasminerx4-u1 miner has a different look than the X4 mining unit. So you get a miner with a sl...
	ETH Ethereum Jasminer X16 ASIC Miner	Seller: Shenzhen Dovina Electronic Co.,Ltd	Model X16Qfrom Jasminer mining EtHash algorithm with a maximum hashrate of 1.845Gh/s for a power ...
	ETH Ethereum iPollo V1 Mini SE Plus ASIC Miner	Seller: Shenzhen Dovina Electronic Co.,Ltd	Model V1 Mini SE Plusfrom iPollo mining EtHash algorithm with a maximum hashrate of 400Mh/s for a...
	ETH Ethereum iPollo V1 Mini SE ASIC Miner	Seller: Shenzhen Dovina Electronic Co.,Ltd	Model V1 Mini SEfrom iPollo mining EtHash algorithm with a maximum hashrate of 200Mh/s for a powe...