.

PVC Injection Molding

Polyvinyl Chloride (PVC or Vinyl) is a high strength thermoplastic material widely used in applications, such as pipes, medical devices, wire and cable insulation...the list is endless. It is the world's third-most widely produced synthetic plastic polymer.

Polyvinyl Chloride can be injection molded just like other plastics but the inclusion of chlorine in the material complicates the process. This is because melted PVC can give off a corrosive toxic gas. Accordingly, shops need to be equipped with sufficient ventilation systems. Those that aren’t are likely to be hesitant to work with the material. Additionally, special corrosive resistant materials like stainless steel or a chrome plating are required for the mold tool when injection molding PVC plastic. Shrinkage in PVC tends to be between one and two percent but can vary based on a number of factors including material durometer (hardness), gate size, holding pressure, holding time, melt temperature, mold wall thickness, mold temperature, and the percentage and type of additives.

Properties of PVC Injection Molding

General performance PVC resin is a white or light yellow powder with a relative density of 1.35-1.45. The hardness of the product can be added by PVC transparent board PVC transparent board. Adjust the number of plasticizers. Pure PVC has low water absorption and permeability.

Thermal properties: The thermal stability of PVC is very poor. It begins to decompose at 140 ° C and the melting temperature is 160 ° C. The coefficient of linear expansion of PVC is small, and it is flame retardant, and the oxidation index is as high as 45 or more.

Electrical properties: PVC is a polymer with better electrical properties, but due to its greater polarity, electrical insulation is not as good as PP and PE. Dielectric constant, dielectric loss tangent and volume resistivity are large, corona resistance is not good, generally suitable for low-voltage and low-frequency insulating materials.

PVC Injection Molding Requirement

Injection Molding Condition Value Unit for reference

Drying Temperature 60-90 °C

Drying Time 4.0-6.0 hr

Suggested Moisture Content <=0.30 %

Rear Barrel Temperature 160-180 °C

Middle Barrel Temperature 170-190 °C

Front Barrel Temperature 180-200 °C

Nozzle Temperature 180-200 °C

Mold Temperature 40-60 °C

Follow our official website,you can know can pvc be injection moldedand pvc injection price,we also provide custom molded plastic parts,pvc plastic injection molding,plastic injection mold makingand plastic molded products,RFQ today.



Send product request

To: Feman Tooling Co., Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Other Materials Molding
Other Materials Molding Other Materials Molding Here we list some other materials for plastic injection molding parts. PE, Polyethylene is a lightweight, durable thermopla...
PC Injection Molding
PC Injection Molding PC is classified as a ''thermoplastic'', and the name has to do with the way the plastic responds to heat. Thermoplastic materials become liquid at...
Acrylic Injection Molding
Acrylic Injection Molding With yeas experience and excellent machinery, Feman Tooling always provides customer high quality injection molding mold, plastic injection mold an...
Nylon is commonly referred to using the chemical designation “PA” (e.g., PA 6 or PA 6/66) and is most widely available in black, white, and its natural color (off-white or beige). Perhaps the most com
Nylon is commonly referred to using the chemical designation “PA” (e.g., PA 6 or PA 6/66) and is most widely available in black, white, and its natural color (off-white or beige). Perhaps the most com Nylon is commonly referred to using the chemical designation “PA” (e.g., PA 6 or PA 6/66) and is most widely available in black, white,...
PVC Injection Molding
PVC Injection Molding Polyvinyl Chloride (PVC or Vinyl) is a high strength thermoplastic material widely used in applications, such as pipes, medical devices, wire and c...
All supplier products

Same products

Upholstered Velvet Bed End Bench Tufted Storage Ottoman Chaise Scroll Arms
Upholstered Velvet Bed End Bench Tufted Storage Ottoman Chaise Scroll Arms Seller: 773847 With undeniably nice looks and ultimate versatility, this upholstered storage ottoman will add a...
LUTEOLIN
LUTEOLIN Seller: shaanxi green bio-engineering co.,ltd
High quality M3X10 waterproof Pan Head nylon patch Machine Screw High quality M3X10 waterproof Pan Head nylon patch Machine Screw
High quality M3X10 waterproof Pan Head nylon patch Machine Screw High quality M3X10 waterproof Pan Head nylon patch Machine Screw Seller: Suzhou Anzhikou Hardware Technology Co., Ltd PRODUCT DESCRIPTION Material Stainless steel, Steel, AIuminium, Brass, etc. St...
Ethyl Trifluoro Acetoacetate
Ethyl Trifluoro Acetoacetate Seller: Jostrong(Tianjin)Technology Co.,Ltd Cas No: 372-31-6 Appearance: Colorless clear liquid Purity: 99% Molecular formula:C6H7F3O3 Molecu...
2,6-Dibromo-4-(Trifluoromethoxy) Aniline
2,6-Dibromo-4-(Trifluoromethoxy) Aniline Seller: Jostrong(Tianjin)Technology Co.,Ltd Cas No: 88149-49-9 Appearance: White to off-white powder Purity: 99% Molecular formula:C7H4Br2F3N...