Matrix 4x4 (RS232 EDID) SK-MT4K44W
Shenzhen Yomband Electronics Co.,Ltd is one of the top level China matrix 4x4 (rs232 edid) sk-mt4k44w manufacturers and suppliers equipped with professional matrix 4x4 (rs232 edid) sk-mt4k44w factory,Website:, we are always at your service.Matrix 4x4 (RS232 EDID) SK-MT4K44WSUN KING (HONG KONG) LIMITED USER MANUAL MODEL NO.: SK-MT4414AHDMI Matrix 4 x 4,4K*2K, 1.4Version,1080pEnjoy the Vivid World!Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. I. IntroductionThe 4x4 DVI/HDMI matrix support output resolution up to 4Kx2K. It allows any source (Blue-Ray player, HD DVD player, satellite receiver, game system, etc.) to be shown on any of four displays simultaneously, no matter the source is HDCP encryption or not. Extra infrared receiver port is supplied for remote control. This matrix offers solutions for digital entertainment center, HDTV retail and show site, HDTV, STB, DVD and projector factory, data center control, information distribution, conference room presentation, school and corporate training environments, etc.II. Features1. Supports display resolutions up to 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D HDMI 1.4a video format support.3. 3D video support including Frame Packing for all 3D formats up to a 297MHz TMDS clock.4. Supports deep color up to 48-bit per pixel.5. HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT).6. Supports reception of any audio data conforming to the HDMI specification 1.4 such ad L-PCM at up to 192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR.7. Full colorimetry including sYCC601, Adobe RGB, Adobe YCC601, xvYCC extended gamut color.8. Operates for TMDS clock frequencies up to 300MHz.III. PackageHDMI Matrix 1PCS12V2.5A DC Power Supply adapter 1PCSOperation Manual 1PCSRemote ControllerPCSIV. Specifications1. Frequency Bandwidth 2.97Gbps2. Input Ports4 x HDMI Female input ports3. Output Ports4 x HDMI Female output ports4. Power SupplyDC 12V, 2.5A5. ESD Protection Human Body Model:± 8kV (air-gap discharge)± 4kV (contact discharge)6. Dimensions (mm) 113(W) X 260 (D) X 26 (H)7. Weight(g) 7508. Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F9. Storage Temperature-20°C ~ 60°C / -4°F ~ 140°F10. Relative Humidity20 ~ 90% RH (Non-condensing)11. Power Consumption (Max) 20WV. Operation Controls and FunctionsFront Panel1. ON/OFF: Power on/off switch.2. POWER: This red LED illuminates when the device is connected with power supply.3. IR IN: Remote control signal receive.4. OUTPUT A: Press this button to select the input source to HDMI OUTPUT A, and these red LED illuminate when the output select to the corresponding input.5. OUTPUT B: Press this button to select the input source to HDMI OUTPUT B, and these red LED illuminate when the output select to the corresponding input.6. OUTPUT C: Press this button to select the input source to HDMI OUTPUT C, and these red LED illuminate when the output select to the corresponding input.7. OUTPUT D: Press this button to select the input source to HDMI OUTPUT D, and these red LED illuminate when the output select to the corresponding input.Rear Panel1. INPUT PORTS: LED1-4 illuminate when the HDMI signal plug in INPUT 1-4 port. INPUT 1-4 ports are where you connect the HDMI source.2. OUTPUT PORTS: LED A-D illuminate when the TV plug in OUTPUT A-D ports. OUTPUT A-D ports are where you connect the HDTV or monitor with HDMI cable3. RS232: This port can control the matrix via PC.4. DC 12V: Plug the 12V DC power supply into the unit and connect the adaptor to AC wall outlet.Right PanelEDID Selector: Select HDMI output signal format via EDID Selector.NomberEDID SelectorDescription10000Auto mode(default)200011080I,Stereo Audio 2.0300101080I,Dolby/DTS 5.1400111080I,HD Audio 7.1501001080P,Stereo Audio 2.0601011080P,Dolby/DTS 5.1701101080P,HD Audio 7.1801113D,Stereo Audio 2.0910003D,Dolby/DTS 5.11010013D,HD Audio 7.11110104K2K,Stereo Audio 2.01210114K2K,Dolby/DTS 5.11311004K2K,HD Audio 7.x768 DVI1511101920x1080 DVI161111PC Software control modeVI. Application ExampleVII. Remote controlOUT A: Press 1234 button will to select input source to HDMI OUT A, and the LED will indicate the corresponding input source. OUT B: Press 1234 button to select input source to HDMI OUT B, and the LED will indicate the corresponding input source. OUT C: Press 1234 button to select input source to HDMI OUT C, and the LED will indicate the corresponding input source. OUT D: Press 1234 button to select input source to HDMI OUT D, and the LED will indicate the corresponding input source. VIII. PC controller user guideInstallationMatrix controller is a green software. Just copy MatrixController.exe to PC which is used to control the Matrix by RS232 COM port or TCP/IP to complete installation.PreparationConnect PC and Matrix by RS232 cable (headers of both sides of cable should be FEMALE) or TCP/IP(local area network)Power-up MatrixDouble click MatirxController.exe icon to run itHow to control Matrix“General” page1. Select RS232 COM or TCP mode2.Select RS232 COM port3.Click to connect or disconnect PC and Matrix4.Select Matrix IP5.Connect to Matrix IP6.Search Matrix IP7.Configure Matrix IP and MAC8.Click to reset to the factory settings9.Device information display area10.Click to refresh device status: include device information displayed in 9 area and Input/Output Settings on “Matrix” page11.Click to clear device information12.Enable or disable BeepConfigure TCP After action of 7, edit form will pop-up as below:1.Select auto or static IP2.Rewrite the Matrix IP3.Rewrite the Matrix MAC“EDID control” pageThe controller have 3 methods to set the EDID mode. Manual mode, Copy mode and open EDID file mode.1. Select the needed EDID to input port and click set button the EDID will write to the selected HDMI input ports.2.Copy the selected HDMI output or HDBT output EDID and click set button to write to the selected HDMI input ports.3.Open the user define EDID file and click set button to write to the selected HDMI input ports. “Matrix” page1. LED which display Input number for respective Output2.Click to select Input port for respective Output port3.Click to select previous or next Input port for respective Output port “FW upgrade” page 1.Click to open FW file(file extension is “.fw”)2.Display the FW file path3.Displaying the progress of the software upgrade4.Click to upgrade the Matrix software5.Display the message of the software upgrade6.Clear the message of the software upgrade
Other supplier products
|
|
Converter HDMI To HDMI+Audio SK-HTHA04P |
Shenzhen Yomband Electronics Co.,Ltd is one of the top level China converter hdmi to hdmi+audio sk-htha04p manufacturers and suppliers equipped wit... |
|
|
Splitter HDMI 1X4 2.0v SK-SP2014W |
Shenzhen Yomband Electronics Co.,Ltd is one of the top level China splitter hdmi 1x4 2.0v sk-sp2014w manufacturers and suppliers equipped with prof... |
|
|
Converter Mini HDMI To AV SK-MHTA01 |
Shenzhen Yomband Electronics Co.,Ltd is one of the top level China converter mini hdmi to av sk-mhta01 manufacturers and suppliers equipped with pr... |
|
|
Matrix 4x4 (RS232 EDID) SK-MT4K44W |
Shenzhen Yomband Electronics Co.,Ltd is one of the top level China matrix 4x4 (rs232 edid) sk-mt4k44w manufacturers and suppliers equipped with pro... |
|
|
Car Air Purifier With Negative Ions Generators |
Shenzhen Yomband Electronics Co.,Ltd is one of the top level China car air purifier with negative ions generators manufacturers and suppliers equip... |
All supplier products
Same products
