DIN 557/562 Square Nuts
Din 557 square nut/562 square nut is a steel fastening device screwed on a steel bolt-on on all four sides. The square nut uses a special wrench to tighten and loosen it from the bolt before the hex nut. The DIN 557/din 562 square nut can be used for both small fastener applications and very large fastener applications as the success of the design has proven to be worthy of countless applications. One reason the DIN 557/562 square nut is so successful is that it is easy to remove and install because the square design has proven to be durable.
DIN 557/562 Square Nuts Specifications
Square Nut DIN 557 Square Nuts DIN 562
Square Nut DIN 557
DIN 557 - 1994 Square Nuts-Product Grade C
Equivalent norm: UNI 5597
DIN557 Square Nut Dimensions
Square Nut DIN 557
Legend Making
P=pitch Carbon Steel:5
K=height of the nut Thread:
D=the nominal diameter of the thread Surface:BLK,ZP,HDG,etc
E=The length of the diagonal
S=The length of the flat
DIN 557/562 Square Nuts Dimentions
Square Nuts DIN 562
DIN 562 - 2013 Square Thin Nuts, Product Grade B
DIN 562 Square Nut Dimensions
Square Nuts DIN 562
DIN 557/562 Square Nuts Dimentions
As one of the fastener manufacturers, we provide fastener material, metric nuts and bolts, structural nuts, etc. For different types of fastener or more information, please feel free to contact us!
Other supplier products
|
|
ASME B 18.2.6 Heavy Hex Nuts (ASTM A563/ A194/ A194M): 2H, 2HM, 7, 7L, 7M, 8/8A, DH, 8S, 10S,10,12 |
ASME B 18.2.6 Heavy Hex Nuts (ASTM A563/ A194/ A194M): 2H, 2HM, 7, 7L, 7M, 8/8A, DH, 8S, 10S,10,12
Datian Fasteners is a very advantageous fastene... |
|
|
JIS B 1186 STRUCTURE NUTS |
DT Fastener provides quality JIS B 1186 structural nuts at great market prices. JIS, Japanese Industrial Standards, is the most important and autho... |
|
|
DIN EN 1663 Lock Nuts |
The superior anti-vibration performance of the DIN EN 1663lock nut: when the thread is tightened, the crest thread of the bolt tightly enters the 3... |
|
|
DIN 934/971/555 HEX NUTS: Class 8, 10, 12 |
DIN 934 nutis a standard norm for nuts. It was first named in Germany. If you want to check whether the mechanical properties of nuts are qualified... |
|
|
ISO 7041 GR. 9, 12 / ISO 7719 GR.5, 8, 10 Locking Nuts |
Originated in the United States, ISO 7041&7719 self-tightening nuts are permanently attached to the thread with a special engineering plastic, ... |
All supplier products
Same products
