.

TRANSPORTABLE CONTAINER BLAST ROOM

The movable sandblasting room or portable blast room, abrasive recovery system, dust collector, portable shot blasting machinetogether, it can be transported to the site by flatbed truck. The installation time is less than 2 hours, which is the best equipment for field-flow operation.

Transportable container portable shot blasterroom features:

The whole blasting room adopts container installation, which can be transported from one place to another easily and convenient for sand blasting;

Theportable sand blasting boothdoes not need foundation pit, can be placed on the ground directly, which reduces the investment cost of the equipment;

The transportable container blast room is suitable for a wide range of abrasive media including but not limited to: steel shot, steel grit, chilled iron, aluminium oxide, glass bead, etc.

The transportable container blast room can quickly change the type of abrasive, the abrasive can be quickly replaced according to the process requirements to realize the processing of workpieces with different materials.

The dust collector for sandblasting roomadopts the filter cartridge type dust collector, which fully meets the environmental protection requirements.

Transportable container blast room fitted out with :

Main doors suitable interlocked – to prevent blasting with doors open.

Operator door – as a means of exit if main doors are stuck, also interlocked.

LED lighting.

Emergency lighting.

Steel floor with side shedders.

Cross screw conveyor at the bulkhead.

Air inlets providing ventilation for blast room and good operator visibility.

Shot-blast quality rubber lining of room.

Shot Blasting Machine

QINGGONG MACHINERY shot blasting machine offers you an effective solution to deal with the surface of the workpieces, including remove the contaminant on the surface, clean and roughen a smooth surface before applying a primer or coating to the workpiece. More specifically, the treatment of a shot blasting machine includes derusting, descaling, desanding, or deburring of the workpieces. Other uses are such as surfaces shot peening, finishing, and roughening of surfaces so as to make coat better.

As the shot blasting machine manufacturer, QINGGONG MACHINERY mainly supplies four types of partial reclaim systems, including sweep-chute floor, single screw, H-shaped partial reclaim system, and U-shape partial reclaim system.

QINGGONG MACHINERY also offers a full spectrum of blast room reclaim floor designs and configurations. Our full floor reclaim system requires merely a shallow concrete foundation. The type of sandblasting room is carefully designed to lift working effiency.



Send product request

To: QINGDAO QINGGONG SETH MACHINERY CO., LTD.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

SAND BLASTING ROOM
SAND BLASTING ROOM The big irregular workpieces blasting and painting job has been widely completed by sand blasting rooms and painting rooms, cause of this of kind ...
SERVO CNC TURRET PUNCHING MACHINE
SERVO CNC TURRET PUNCHING MACHINE The main transmission of servo CNC turret punching machineis directly from servo drive turret punch press, which retains the advantage of a simple ...
BARREL TYPE SHOT BLASTING MACHINE
BARREL TYPE SHOT BLASTING MACHINE The Barrel Blast Machine line provides outstanding performance and reliability. Designed for foundry, forge and heat treat requirements. The Barre...
PIPE SHOT BLASTING MACHINE
PIPE SHOT BLASTING MACHINE Pipe shot blasting machineor steel pipe shot blasting machineis suitable for any diameter and length of steel pipe cleaning, it can remove the oxid...
MESH BELT SHOT BLASTING MACHINE
MESH BELT SHOT BLASTING MACHINE Wire mesh shot blasting machineor steel belt shot blasting machineis suitable for continuous blasting thin and collision-sensitive die castings, pr...
All supplier products

Same products

RONGPENG High Quality R803 HVLP 1.0mm Nozzle Spray Gun Pro Painting Gun Water Based Air Spray Gun Airbrush Pneumatic Tool
RONGPENG High Quality R803 HVLP 1.0mm Nozzle Spray Gun Pro Painting Gun Water Based Air Spray Gun Airbrush Pneumatic Tool Seller: 773794 特征: • 铝锻造枪身,带有精密加工的气帽组。• 不锈钢针和喷嘴适用于多种涂层。• 更好的表面质量,实现一尘不染的光洁度。• 确保出色的涂装效果。&bul...
Brass CNC Lathing Parts
Brass CNC Lathing Parts Seller: ShenZhen City YuanYiDa precise manufacture Co.,Ltd cnc milling brass / milling brass cnc router / cnc router brass cnc machine for brass / brass die...
Anodized Aluminum Cnc Parts, Anodizing Parts Cnc Machining, CNC Machining Parts
Anodized Aluminum Cnc Parts, Anodizing Parts Cnc Machining, CNC Machining Parts Seller: ShenZhen City YuanYiDa precise manufacture Co.,Ltd These are the machining aluminum parts, anodizing large aluminum partsrecently produced by us. It...
Alunminum CNC Lathing Parts
Alunminum CNC Lathing Parts Seller: ShenZhen City YuanYiDa precise manufacture Co.,Ltd This is the custom aluminium partsrecently produced by us. It meets the requirements of ISO9001:2...
Aluminum CNC Machining Parts
Aluminum CNC Machining Parts Seller: ShenZhen City YuanYiDa precise manufacture Co.,Ltd This is the machining aluminum partsrecently produced by us. It meets the requirements of ISO9001...