Water Cooling CNC Vacuum Pump
As one of the mature CNC components manufacturersin China, HYCNC can provide various CNC router partsincluding spindle motors, CNC controllers, AC motor drivers, linear motion parts, servo motors and drivers. Our CNC Machines are extensively applicable in many areas of mechanical processing, such as the industrial, commercial and hobby sectors.
Water Cooling CNC Vacuum Pump
product name: |
water-cooled CNC vacuum pump |
product brand: |
HYCNC |
Product power: |
|
Product voltage: |
380v |
Rotating speed: |
1440r/min |
Ultimate pressure: |
|
Maximum gas volume: |
|
Product Origin: |
Shandong Jinan |
Delivery date: |
1-7 days |
Product Introduction and Description of Water Cooling CNC Vacuum Pump
Applicable machine: cnc router
product composition:
Installation and operation tips of CNC router vacuum adsorption pump:
Similar to the air cooled vacuum pump, the vacuum adsorption plate or table of water cooled vacuum pumpalso requires the customer to groove the groove. After the groove is grooved, flange joints are installed in each area. The most common is 6 areas (which can be partitioned according to customer needs). 6 pcs flange joints are connected to the pipe. Then, connect the 6 pcs valve to the 6-way connector, and connect the wire pipe from the 6-way connector to the vacuum pump.
Tips: It is recommended to use vacuum pumps above 4kw for CNC routers. Generally, the adsorption platform of the CNC router is 5.5kw, 7.5kw, and 11kw. The smaller the power, the smaller the suction power! It is not recommended to use less than 4kw.
The influencing factors of vacuum pump suction are as follows:
1 Pipeline leakage
2 Internal pump leakage
3 Insufficient water supply
4 High water supply temperature
5 Poor exhaust discharge
6 The gap of the adsorption pump is damaged
Analyze from the above reasons. Check whether it is resolved.
The influencing factors of vacuum pump suction are as follows:
The vacuum pressure of the vacuum pump is the same. The only difference is flow. If the force is not enough, the easiest way is to enlarge the suction cup size. If the air leakage is serious during adsorption, the flow should be increased by increasing the power of the vacuum pump; if the strength is not enough, the adsorption area should be increased; if the adsorption area is large, the board is deformed, it should be multiple adsorption ports.
Send product request
Other supplier products
ER25 Collect | Founded in 2008, Jinan Hongyang CNC machinery co., Ltd is located in the well-known hometown of CNCparts-Jinan, Shandong Province. Now, HYCNC is a ... | |
Air Cooling CNC Vacuum Pump | Air-cooled vacuum pump HYCNC 5.5/7.5/11kw 5.5KW:345v/415v 7.5KW:345v/415v 11KW:380v 50hz 5.5KW:-34/50kpa 7.5KW:-35/56kpa 11KW:62kpa 5.5KW:12A /14.4... | |
Professional Grade Woodworking Drill | As one of the mature CNC components manufacturersin China, HYCNC can provide various CNC router partsincluding spindle motors, CNC controllers, AC ... | |
Changsheng 2.2kw ER20 Round Air Cooled Spindle Motor | model: GDZ-80F-2.2B Dimensions: Φ80*195 Rotating speed: 24000RPM power: Voltage: ... | |
Automatic Tool Changer | CNC router parts tool changer(ATC), or the so-called CNC tool changer, is mainly used on automatic tool change machines. At present, there are in t... |
Same products
Twist Knot Cup Brush | Seller: Shanghai Longguang Industrial Brushes Co., Ltd | Diamond Cup Brush is a powerful cutting force brush, can easily remove the most stubborn and hard... | |
End Brush | Seller: Shanghai Longguang Industrial Brushes Co., Ltd | Types of End Brushes End brushis a common small industrial brush, whose structure is simple but ... | |
Disc Brush | Seller: Shanghai Longguang Industrial Brushes Co., Ltd | Types of Disc Brushes The disc brush is specially used to deal with the surface of metal, such a... | |
Metal Polish Brush | Seller: Shanghai Longguang Industrial Brushes Co., Ltd | Metal polishing is a professional, complex knowledge. Different kinds of metal need different abr... | |
Deburring Brushes | Seller: Shanghai Longguang Industrial Brushes Co., Ltd | Deburring is a problem faced by all metal processing enterprises. The size of the burr directly a... |