Coaxial Load
The coaxial terminal load as the energy absorption element in the system is used for the end connection of coaxial transmission system and is generally used for the system test of RF signal transmission. It has the characteristic impedance matching with the transmission line.
coaxial attenuator
Coaxial load can improve the matching performance of the circuit, which is usually connected to the terminal of the circuit. It can also be called a terminal load or a matching load. There might have been unconnected coaxial ports in many application environments, such as radio equipment, electronic instruments, and various microwave devices. The idle port will lead to signal leakage, make the signal from the nearby equipment enter, and cause crosstalk to the line. In order to avoid this kind of problem, the general solution is to connect a coaxial loadthat can match the impedance between the spare channel and the test port. It can not only ensure the signal impedance matching but also significantly reduce the signal leakage of the vacant port and the mutual interference between the systems.
FAQs of HBTE Coaxial Load
What is the function of impedance matching?
Impedance matching refers to a suitable match between signal source or transmission line and load. Impedance matching has two main functions: adjusting load power and suppressing signal reflection.
If I exceed the maximum input level, will I burn out the fixed coaxial attenuator?
This is not recommended as it may cause data distortion or burn down coaxial load.
All of HBTE coaxial load are tested and specified at 50Ω impedance, can I use them at 75Ω?
It is not recommended.If you need key specifications for the 75 Ω system, please contact our salesman.
More information about 5g mmwave cpecan be scanned from our web.
Send product request
Other supplier products
 |
Reverberation Chamber | HBTEMIMO OTA test system provides a flexible, fast and efficient end-to-end testing system which supporting CBRS5G NRFR2 technology in a RF anechoi... |
 |
Open Waveguide Probe Antenna | Open Waveguide Probe Antenna HBTE Standard gain horn antenna with elaborate design and manufacturing process is widely used in EMI/EMC/EMF detecti... |
 |
OTA System | We provide 5g nr module, 5g nr n77, cbrs 5g nr, mmwave ghz,etc. We also have reverberation chamber, antenna measurement system, programmable rf att... |
 |
Automotive OTA Test System | The Internet of Vehicles is a promising development direction for the automotive industry in the next few decades. On-board applications such as se... |
 |
Pneumatic Shielded Box | HBTE pneumatic shield boxis made by sheet metal process, which has good shielded sealing and strong structure.It is the switch of pneumatic control... |
Same products
 |
Climate And Vibration Combined Test | Seller: Guangdong Yuanyao Test Equipment Co.,Ltd. | Model: YTHV-216 YTHV-343 YTHV-512 YTHV-720 YTHV-1000 Main Parameters: Temperature: 0℃/-20℃/... |
 |
High Temperature Clean Drying Oven | Seller: Guangdong Yuanyao Test Equipment Co.,Ltd. | Model: YCO-072 YCO-270 YCO-480 YCO-600 YCO-720 YCO-1000 Main Parameters: Dustproof class: C... |
 |
Air-ventilation Aging Test Chamber | Seller: Guangdong Yuanyao Test Equipment Co.,Ltd. | Model: YTAT-101 | YTAT-216 Main Parameters: Temperature range: RT+25℃～200℃（300℃） Tempera... |
 |
Air-ventilation Aging Test Chamber | Seller: Guangdong Yuanyao Test Equipment Co.,Ltd. | Model: YTAT-101 | YTAT-216 Main Parameters: Temperature range: RT+25℃～200℃（300℃） Tempera... |
 |
Aging Test Chamber | Seller: Guangdong Yuanyao Test Equipment Co.,Ltd. | The accelerated ageing chamberis a testing equipment used to simulate and evaluate the aging proc... |
