Steel Plate Shot Blasting Machine

Specification of BH Steel Plate Shot Blasting Machine

Steel Plate Shot Blasting Machine Video

Details of BH Steel Plate Shot Blasting Machine

This production line consists of a feeding roller table, a workpiece detection device, shot blasting cleaning, shot material circulation system, cleaning device, chamber roller table, feeding roller table, shot blasting dust removal system, and electric control system.

The workpiece is moved to the feeding roller table by the loading forklift or row crane, and then sent to the closing shot blasting cleaning room by the roller table conveyor system. Impact on the surface of the workpiece, scrape to remove the rust and dirt on the surface of the workpiece, and then use the roller brush, pill collection screw and high-pressure blowpipe to clean the accumulated particles and floating dust on the surface of the workpiece, and then send it out of the purge chamber by the roller conveyor. Arrive at the delivery roller table, and then transport to the designated unloading rack via forklift or crane.

Advantages of BH Steel Plate Shot Blasting Machine

lThe shot blaster layout is computer-simulated and arranged in a diamond shape. The upper and lower shot blasters correspond to each other to improve the utilization rate of the abrasive. Make the abrasive coverage uniform.

lShot blasting Chamber guard plates adopt 8mm thick impact-resistant and wear-resistant 65Mn, and adopts building block installation method. The arrangement of the guard plate more effectively improves the room protection effect. The number of shot blasters can be determined according to the size of the workpiece, which can reduce unnecessary energy waste and reduce unnecessary damage to the equipment.

lSeparation device adopts advanced full-curtain flow curtain-type slag separator, and the separation efficiency can reach 99.9%

lWorkpiece detection device, effectively controls the opening and stopping time of the shot blasting machine, avoid the empty emptying of the shot blasting machine, save energy, and improve the lives of the wearing parts such as the room guard plate and the shot blasting machine.

lAutomatic fault detection and alarm, and automatic stop after the delay.

lDust removal system adopts high-efficiency filter drum dust collector, the dust emission is within 100mg / m3, and the workshop dust emission is within 10mg / m3, which greatly improves the worker's operating environment.

lThe bearing protection at both ends of the elevator, separator, and screw conveyor adopts a labyrinth sealing device and a U-shaped boss structure. The separation screw and screw conveyor discharge ports are arranged at a distance from the end, and at the end of the screw Add reverse conveying blades.

lThe hoist adopts special polyester wire core hoist transmission belt, and the upper and lower reels of the hoist adopt chamfered squirrel cage structure, which not only increases friction to avoid slipping, but also prevents scratching of the belt. Each power point of the abrasive circulation system is provided with a fault alarm function.

lThe large nut fixed by our company adopts cast special iron nut, its structure and the contact surface of the protective plate are larger, and it is more effective to prevent the broken ring caused by the abrasive entering the shell due to the loosening of the nut.

labrasive cleaning

lIn order to meet the requirements of higher production efficiency, we use:

lFirst-level cleaning: high-strength nylon roller brush + pill collecting screw; cleaning brush life ≥5400h

lSecondary air blowing: high-pressure fan blows shots and blows dust inside and outside the cleaning chamber to ensure that there are no shots on the surface when the steel plate is cleaned out of the cleaning room.

lRoller drive adopts stepless frequency conversion speed regulation (using a frequency converter, the manufacturer is generally Mitsubishi, can also be specified), instead of speed regulation motor, the entire workpiece conveying system frequency conversion stepless speed regulation. (Speed range 0.5-4m / min)

lInput, output and segmented transmission of the chamber roller table, stepless speed regulation, that is, it can run synchronously with the entire line, and can also run quickly, so that the steel can quickly travel to the work position or quickly exit to the discharge station purpose.

lAdopt full line PLC programmable controller power, automatic detection and automatic search for fault point, sound and light alarm.

lThe equipment has a compact structure, a reasonable layout, and is very convenient for maintenance.

Application of Steel Plate Shot Blasting Machine

Steel Sheet Shot Blasting Machineis designed based on a roller conveyor and especially developed to meet the needs of the fabrication industry, the range of machines descales and removes rust prior to fabrication. Rolled steel plate, shapes and fabrications are used across a wide range of sectors, from construction to shipbuilding. It provides a better surface for welding and improves coating adhesion. Large sections can be cleaned quickly, saving time and reducing bottlenecks in production.

Production Process of Steel Plate Shot Blasting Machine

Drawing of Steel Plate Shot Blasting Machine

BHis a professional blasting equipment suppliers, we provide media blasting supplies, air blasting machine, etc.

Other supplier products

	Roller Conveyor Shot Blasting Machine	This type of roller shot blasting machineused for surface treatment of steel plates, steel profiles, steel pipes, steel rods, steel structure and o...
	Shot Blasting Room	Sand blasting room is primarily for cleaning big steel structural parts, vessel, truck chassis to remove the rusty spot, rusty layer and scale cind...
	Shot Blasting Booth	Trolley sand blasting booth is special equipment designed to meet specific process requirements. Through sandblast cleaning, the dirt, oxide scale,...
	Tumble Belt Shot Blasting Machine	Tumble Belt Shot Blasting Machineis suitable for surface cleaning and strengthening of medium or small size castings, forge pieces, variety of hard...
	Hook Type Shot Blasting Machine	Hook type shot blasting machine is suitable for cleaning the foundry part, construction, chemical engineering, machine tools and many other industr...

All supplier products

Same products

	GREENMAX Polystyrene Densifier ZEUS C200	Seller: INTCO Recycling	Foam Densifier ZEUS C200 can prevent the compacted EPS, PE Foam, and other materials from scatter...
	GREENMAX Polystyrene Densifier ZEUS C100	Seller: INTCO Recycling	Foam Densifier can prevent the compacted EPS, PE Foam, and other Foam material from scattering. G...
	Antigua and Barbuda-liquid nitrogen dewar semen tank KGSQ	Seller: Henan Tianzhidao Biological Technology Co., Ltd.	Livestock frozen sperm storage liquid nitrogen tanks are the ultimate line of defence for guardin...
	Complete Trailer Axles	Seller: SHANDONG ZHENGYANG MACHINERY CO.,LTD.	The Complete Trailer Axlescome in a variety of sizes and configurations to meet your diverse need...
	Explosion-proof Vacuum Cleaner	Seller: Dongguan VILLO Technology Inc.	The ATEXvacuum cleaneris equipped with a turbine motor, which can work continuously for 24 hours,...