OK87 series universal solenoid valve
CE certified
Materials: SS304 or SS316, nodular cast iron and special WCB
Technical data:
Orifice diameter: 3 ~ 250mm
Principle: direct action, step-by-step, direct and pilot
Seal: NBR, FKM, PTFE and red copper
Fluid: liquid, water, air, steam, oil and gas (acetylene)
Ambient temperature: -30 to 60C
Fluid temperature:
C1: -10 to 60C, NBR, FKM and PTFE
C2: -25 to 90C, FKM and PTFE
C3: -10 to 120C, FKM and PTFE
C33: -10 to 150C, FKM and PTFE
C5: -10 to 220C, PTFE
C6: -10 to 250C, PTFE and red copper
CD1: -40 to 60C, PTFE
CD2: -60 to 60C (special)
CD3: -120 to 60C (special)
Viscosity: 22mm2/s
Connection: internal thread flange
Install: horizontal and coil up (customized)
Protection grade: IP54 (ex-proof type: IP65)
Voltage:
AC: 380, 220, 110, 48, 36 and 24V at 50/60Hz
DC: 220, 110, 48 and 12V
Options:
Normally open (K), close when energized and de-energized
Ex-proof level (E): dCIIT4/T5
S: hand reset open and closed
Other supplier products
|
|
OK51 series diaphragm solenoid valve |
Technical data:
Orifice: 5 to 50mm
Principle structure: direct action diaphragm
Body materials: brass, SS304 and SS316
Seals: FKM, NBR and EPDM
Am... |
|
|
OK87 series universal solenoid valve |
CE certified
Materials: SS304 or SS316, nodular cast iron and special WCB
Technical data:
Orifice diameter: 3 ~ 250mm
Principle: direct action, ste... |
|
|
OK61C series aluminum solenoid valve |
CE certified
Technical data:
Material: aluminum, brass and 304 stainless steel
Orifice diameter: 1 to 3mm
Principle structure: direct action
Ambien... |
|
|
OK60 series low temperature solenoid valve |
Technical data:
Orifice: 1~40mm
Principle structure: direct action piston
Body materials: Brass,SS304
Seals: PTFE
Ambient temperature: -100 to 10C
... |
|
|
OK62A series solenoid valve |
2 way solenoid valve
With CE and ISO 9001 certification
Widely used
Technical data:
Orifice diameter: 1 ~ 6mm
Principle structure: direct action
Bo... |
All supplier products
Same products
