Good applicability cnc lathe machines for sale
Good applicability cnc lathe machines for sale
This series areeconomical and practical CNC lathe series,which are not only suitable for all kinds of complex shape of the shaft, the inner and outer surfaces of the disk, the conical surface, the circular arc surface, but also widelyused in various industriessuch as automotive, petroleum, military and other mechanical processing.The lathe has advantages such as high efficiency, low scrap rate, good consistency and so on.
|
UNIT |
CK6142A |
||
|
CAPACITIES |
Swing over bed |
mm |
420 |
|
Swing over carriage |
mm |
230 |
|
|
Max.length of workpiece |
mm |
750-1000 |
|
|
Max.turning length |
mm |
600-830 |
|
|
Pan of guideway |
mm |
350 |
|
|
SPINDLE |
Spindle nose |
mm |
A2-6 |
|
Spindle bore |
mm |
66 |
|
|
Taper hole of spindle |
70/1:20 |
||
|
Range of spindle speeds |
r/min |
0-2000 |
|
|
No.of spindle speeds |
Stepless |
||
|
Center height from bed |
mm |
210 |
|
|
FEED |
Chuck |
mm |
200 |
|
Min.feed increment |
mm |
0.001/0.001 |
|
|
Rapid speeds |
mm/min |
4000/5000 |
|
|
TURRET |
Max.travel of X |
mm |
220 |
|
Turret working position |
V4 |
||
|
Indexing time |
s |
2.4 |
|
|
indexing repeatility |
mm |
0.008 |
|
|
TAILSTOCK |
Section of tool shank |
mm |
25X25 |
|
Dia. of tailstock quill |
mm |
60 |
|
|
Travel of tailstock quill |
100 |
||
|
OTHERS |
Taperhole of tailstock |
|
|
|
Workpiece accuracy |
IT6 |
||
|
Surface roughness |
μm |
Ra1.6 |
|
|
Main power |
kw |
7.5 |
|
|
Lathe mass |
kg |
1800 2000 |
|
|
Length |
mm |
2300 2550 |
|
|
Width/ Height |
mm |
1500/1500 |
|
|
CNC System |
mm |
FANUC Series0i-TD(optional Siemens system) |
|
- strong adaptability high quality
- high precision good rigidity
Anyang Xinheng Machine Tool Co. Ltd.is a professional machine tool manufacturer since 1946. Our factory covers an area of more than 30000 squares meters, equipped with our updated manufacturing facilities. We haveLATHE, CNC LATHE, PIPE THREAD LATHE, SPHERE TURNING LATHEetc. We have attained ISO9001:2000 International Quality Control System Certification.Our products are sold both at home and abroad, and they are very popular around the world. Welcome to contact us !
General horizontal lathe machine:
To our surprise, the lathe worked very well without any problems.
Charlene from US
“The quality of the equipment is good,and maintenance operation is convenient.”
--Mr. Chen
“The equipment quality is satisfactory, the company's service is good, we can not meet the problem.”
--Mr.Fernanda
Send product request
Other supplier products
 |
Swing over bed 1250mm good applicability conventional lathe machine for sale | Good applicability conventional lathe machine for sale This series lathe is suitable for large and medium parts processing for castings, steel pa... |
 |
High qualified rate drill collar production line for Upset Forging of Casing Pipe | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
 |
sucker rod production line for Upset Forging of Drill the well for oil pipe | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
 |
oil casing tube forging upsetter for Upset Forging of oil pipes casing tubing | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
 |
High quality cnc turning lathe price | High quality cnc turning lathe price This series iseconomical and practical CNC lathe,which are not only suitable for all kinds of complex shape ... |
Same products
 |
Point Rails Lowering Value Measuring Ruler | Seller: 842518 | The frog vertical wear measuring ruler is used to measure the vertical wear value at any part of ... |
 |
Portable Laser Alignment Device | Seller: 842518 | Laser Alignment Device is used for measuring track level and line to aid track measurement and ha... |
 |
Rail cant measurement device | Seller: 842518 | The main part of the wheel tread is an inward inclination of 1:40 . In order to make the top of t... |
 |
NGM-6.3II Internal Combustion Rail Grinding Machine | Seller: 842518 | This machine is mainly used for the recovery and grinding of welded joints,calendering burrs,rail... |
 |
NCM-5.1 Internal Combustion Turnout Grinding Machine | Seller: 842518 | NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch a... |
