Chinese high speed precision cnc lathe for sale
Chinese high speed precision cnc lathe for sale
These series are economical CNC horizontal lathe, which are not only suitable for automobiles, tractors, militaries, machines and other industries, but also can be used for the machining of the inner and outer cylindrical surface, conical surface, circular arc surface, end face, groove cutting etc.
|
UNIT |
CKP61125 |
||
|
CAPACITIES |
Swing over bed |
mm |
1250 |
|
Swing over carriage |
mm |
880 |
|
|
Max.length of workpiece |
mm |
3000 |
|
|
Max.turning length |
mm |
2730 |
|
|
Pan of guideway |
mm |
755 |
|
|
SPINDLE |
Spindle nose |
A2-15 |
|
|
Spindle bore |
mm |
130 |
|
|
Taper hole of spindle |
1:20/140 |
||
|
Range of spindle speeds |
r/min |
3.15~315 |
|
|
No.of spindle speeds |
Manual four gear, the file Promise |
||
|
Center height from bed |
mm |
625 |
|
|
Chuck |
mm |
1000 |
|
|
FEED |
Min.feed increment |
mm |
0.001/0.001 |
|
Rapid speeds |
mm/min |
3000/6000 |
|
|
Max.travel |
mm |
580 |
|
|
TURRET |
Turret working position |
V4 |
|
|
Indexing time |
s |
2.6 |
|
|
indexing repeatility |
mm |
0.01 |
|
|
Section of tool shank |
mm |
40X40 |
|
|
TAILSTOCK |
Dia. of tailstock quill |
mm |
160/300 |
|
Travel of tailstock quill |
mm |
160/300 |
|
|
Taperhole of tailstock |
Morse6 |
||
|
OTHERS |
Workpiece accuracy |
IT6~IT7 |
|
|
Surface roughness |
μm |
Ra1.6 |
|
|
Main power |
kw |
22 |
|
|
Lathe mass |
kg |
11000 |
|
|
Length |
mm |
6000 |
|
|
Width/Height |
mm |
2600/2600 |
|
|
CNC System |
FANUC Series0i-mate-TD/0i-TD |
||
there are two layers of skateboard (medium, small skateboard), the saddle and the frame body together. Used to install the lathe tool and drive the lathe tool for longitudinal, transverse or oblique movement.
have always been devoting to the research and manufacture of machine tools. We haveLATHE, CNC LATHE, PIPE THREAD LATHE, SPHERE TURNING LATHEetc. We have the most professional research and development machines, who can meet all different requirements on technology and production. Welcome to contact us !
Pre -Sale
♠Accordingtoclientsrequirement(Purchasepurpose),wecanofferserviceasfollowing:
♠Projectsystemevaluationinvestmentbudget
♠Sitemeasurement
♠Technicaldiscussion
♠Supplyprofessionaldrawingandlists
In-sale
♠Qualityguaranteed
♠Fieldserviceforequipmentinstallationandtrainingwork
♠Acceptanceanddelivery
Afer-sale
♠24honineresponse
♠Supplyingsparepartsatcostprice
♠Regularreturnvisit
Send product request
Other supplier products
 |
sucker rod production line for Upset Forging of Drill the well for oil pipe | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
 |
High quality cnc turning lathe price | High quality cnc turning lathe price This series iseconomical and practical CNC lathe,which are not only suitable for all kinds of complex shape ... |
 |
tubing upsetting press for Upset Forging of Oil Field tube | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
 |
Good applicability cnc lathe machines for sale | Good applicability cnc lathe machines for sale This series areeconomical and practical CNC lathe series,which are not only suitable for all kinds... |
 |
tubular upsetting press for Upset Forging of Oil Extraction pipe | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
Same products
 |
Point Rails Lowering Value Measuring Ruler | Seller: 842518 | The frog vertical wear measuring ruler is used to measure the vertical wear value at any part of ... |
 |
Portable Laser Alignment Device | Seller: 842518 | Laser Alignment Device is used for measuring track level and line to aid track measurement and ha... |
 |
Rail cant measurement device | Seller: 842518 | The main part of the wheel tread is an inward inclination of 1:40 . In order to make the top of t... |
 |
NGM-6.3II Internal Combustion Rail Grinding Machine | Seller: 842518 | This machine is mainly used for the recovery and grinding of welded joints,calendering burrs,rail... |
 |
NCM-5.1 Internal Combustion Turnout Grinding Machine | Seller: 842518 | NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch a... |
