Hot Sale Remote Control 50-200T Bridge Erection Machinery Beam Launcher
Beam launcher is used in the erection of precast beam bridges for span by span method of construction for precast beam girders like T beam,U beam, etc. This self beam launcher is suitable for bridge construction over river,valley or highway and so on.
Highway bridge beam launcher gantry is suitable for the construction of bridge for roads, railways and other bridge erection construction site. Its main function is to lift the prefabricated beams, then transported onto the prefabricated pier. It has big difference from the general cranes. It requests high security.
Packing.
1. Electric parts are packed by high quality plywood crate, to reduce distortion in conveying;
2. Main beams, end beams and electric hoist are packed by plastic woven cloth. It can reduce abrasion when transport.
Delivery.
1.If the size of whole crane are suitable for container ship, usually by container;
2.If the size is too big, usually by bulk ship or by container after truncation; Transport ways are based on reducing cost for you and keep the crane performance.
Deliverytime
Within 15 ~30 business days after the receipt of deposit.
Transportation
Generally35daysto50daystodestinationport.
1.What’stheinformationshouldIprovidewheninquiry about the beam launcher?
1.1 we need the Bridge Drawing;the Maximum longitudinal slope and the Maximum Transverse slope;
1.2 The Girder/beam drawing;
2.What are inspection standard for load test of Beam launcher cranes?
2.1.Dynamic load test
1.1 times rated load, main girder does not down deflection, all mechanisms work well, performance parameters meet the design demand, all limit switches and safety protection interlock devices are reliable, all spare parts does not have cracking and flexible connection, all motors and contactors are not overheat.
2.2.Static load test
1.25times rated load, all mechanisms work well, the crane stops 20-30min as trial load is lifted 10cm high, then measure main girder down deflection(theodolite, ruler). Put down trial load to measure main girder upper camber, repeat 3 times, steel structure does not have permanent deformation;
3.How to make highway bridge concrete girders?
a.Full span prefabrication,
b.Segment girder prefabrication
c. Full span cast-in-place girder
d. Segment cast-in-situ
Send product request
Other supplier products
 |
segmental assembly concrete 1500T bridge launcher machine for highspeed railway project | Product Description Thesegmental concrete 1500T bridge launcher machineis used to construct prefabricated spans up to 60m long. It is designed and ... |
 |
Good quality underslung launching gantry crane for railway girder erection | Product Description Both the overhead and underslung launching gantry (LG) consist of two independent self-supporting main structures combined ... |
 |
high quality bridge transporter beam trolley | Product Description: High quality bridge transporter beam trolley has characteristic of carrying large capacity, self-propelled, transport without ... |
 |
50t quay crane double girder container gantry crane for sale | Product Application 50t quay crane double girder container gantry cranealso called STS (ship to shore) crane, which isakindofhoistingmachine... |
 |
hot sale 160 ton double truss beam launcher for highway project | hot sale 160 ton double truss beam launcher for highway projectis suitable for the construction of bridge for roads, railways and other bridge erec... |
Same products
 |
Point Rails Lowering Value Measuring Ruler | Seller: 842518 | The frog vertical wear measuring ruler is used to measure the vertical wear value at any part of ... |
 |
Portable Laser Alignment Device | Seller: 842518 | Laser Alignment Device is used for measuring track level and line to aid track measurement and ha... |
 |
Rail cant measurement device | Seller: 842518 | The main part of the wheel tread is an inward inclination of 1:40 . In order to make the top of t... |
 |
NGM-6.3II Internal Combustion Rail Grinding Machine | Seller: 842518 | This machine is mainly used for the recovery and grinding of welded joints,calendering burrs,rail... |
 |
NCM-5.1 Internal Combustion Turnout Grinding Machine | Seller: 842518 | NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch a... |
