High-Speed Drilling EDMS
Product category:
Product model: WJD730
Brand: Wenjie CNC
Manufacturer:
The electro discharge drilling machine tool is mainly used for wire cutting EDM holes, chemical fiber spinneret, spinneret plate holes, filter plate, group holes of screen plate, engine blades, heat emission holes of cylinders and oil and gas holes of hydraulic and pneumatic valves, etc. It can also be used to corrode broken iron head and screw tap in the workpiece, without damaging the original hole or thread. The machinable aperture is ￠0.3～￠3.0; the maximum ratio of pit-depth to pit-diameter can reach up to 300:1; penetration can be achieved directly from slopes and hook faces. small hole machine has the characteristics of precision linear bearing, low loss, high efficiency, convenient operation, two shafts equipped with a digital display device and fast processing speed, etc.
Technical parameter
|
Type |
WJD730 |
|
Electrode diameter（mm） |
Ф0.3-Ф3.0 |
|
Work head travel（mm） |
250 |
|
Z-axis servo travel（mm） |
290 |
|
Z-axis Max Adjust Speed（mm/min） |
120 |
|
Circumgyrate Head（C axis）Rev |
60 |
|
Worktable Size（mm）of intelligent control CNC Machine Tool |
340×440 |
|
X-Y travel（mm） |
300×350 |
|
The maximum space between the guider and worktable（mm） |
70-290 |
|
Worktable high（mm） |
950 |
|
Max processing current（A） |
30 |
|
Input max power（kw） |
|
|
Power supply input way（V/Hz） |
380/50 |
|
Work flume capability（L） |
25 |
|
Work liquid filtrate way |
Shallow seam type |
|
Max pump pressure（Mpa） |
6 |
|
Host outline size (L*W*H)（mm） |
1150×800×800 |
|
Machine weight（kg） |
852 |
More information please view .
Send product request
Other supplier products
 |
CNC Machine Tool—Single-Chip Microcomputer Control System | Product category: Product model: Single-chip microcomputer control system Brand: Wenjie CNC Manufacturer: Taizhou Wenjie CNC Equipment Co., Ltd... |
 |
CNC Spark Wire Cutting Machine Tool | Product category: Product model: DK77series wire cutting machine tool Brand: Wenjie CNC Manufacturer: Taizhou Wenjie CNC Equipment Co., Ltd. Desc... |
 |
Medium Speed Wire-Cutting Machine | Description Machine tool type PD-40SE/ST Worktable Size (W*L) 850×600mm Max trip of X,Y-axis of the worktable （Y×X） ... |
 |
PD-40SE Medium Speed Wire-Cutting Machine | Description Machine tool type PD-40SE/ST Worktable Size (W*L) 850×600mm Max trip of X,Y-axis of th... |
 |
DK77100 CNC electric spark wire cutting machine tool(super machine tool) | Description Type Unit DK77100 Worktable Size(W*L) mm 1100×1500 X,Y-axis trip（Y×X） m... |
Same products
 |
XD-MAX Winch for Drone | Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-MAX Winch for Drone The XD-MAX Winch for Droneis a high-performance aerial lifting solution d... |
 |
XD-55 Winch for Drone | Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-55 Winch for Drone Introducing the XD-55 Winch for Drone—an advanced lifting system eng... |
 |
XD-10 Winch for Drone | Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-10 Winch for Drone SAFE, EFFICIENT AND CONVENIENT.Your reliable and intelligent air transport... |
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Seller: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | Seller: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
