Small Oil Press Machine
Small oil machineis a kind of oil press, whose output is not large. But it is simple and convenient. The main products are hydraulic oil press and screw oil press. The product is mainly used in the domestic processing oil. The current price of mini oil extractor is between 10,000 and 20,000.
Nine advantages of mini oil machine:
Maintenance of mini oil machine
(I) the lubrication should be checked after every 50 hours of work. The oil cup on the reducer should not be short of oil.
(II) The wet oil parts shall be prevented from the invasion of dust and other impurities. The oil quality of the reducer shall be checked once a year. If it is found to be deteriorated, all oil shall be replaced.
(III) When the amount of pressing is reduced and the oil output is out of order, the screw shaft shall be extracted, and the wear of the screw, the strip and the ring shall be checked, and the worn parts shall be replaced in time.
(IV) After each shift of work, the residual cakes in the machine shall be cleaned, and dust and grease on the machine surface shall be cleaned.
(V) After the end of the production season, long-term storage shall be conducted, followed by maintenance. Remove and re-grease the screw, strip and cake ring, and put them in the dry place.
Send product request
Other supplier products
 |
Cold Oil Press Machine | Cold pressing is to press the oil directly in the oil press without heating after the oil is screened and cleaned. It is difficult to press the oil... |
 |
Castor Oil Press Machine | Castor oil extraction machineis composed of electrical control, automatic heating, adjustment, transmission, and vacuum oil filter. The screw is ca... |
 |
YZYX168 Screw Oil Press Machine | YZYX168 is the biggest model for single screw oil press machine, with a 20 tons capacity per day, at the same time, with strong compatibility and h... |
 |
Palm Kernel Oil Press Machine | Palm kernel oil expelleris a widely planted oil crop in the tropics. Not only the palm fruit but also the palm kernel can extract oil. In general, ... |
 |
Small Oil Press Machine | Small oil machineis a kind of oil press, whose output is not large. But it is simple and convenient. The main products are hydraulic oil press and ... |
Same products
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Seller: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | Seller: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
 |
3 in1 Decoiler Leveler Feeder | Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd. | 3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f... |
 |
NC Servo Feeder (0.1-3.0mm) | Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd. | NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of... |
 |
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage | Seller: Uratech USA Inc | TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool... |
