Castor Oil Press Machine
Castor oil extraction machine is composed of electrical control, automatic heating, adjustment, transmission, and vacuum oil filter. The screw is carburized by alloy steel to enhance surface hardness and wear resistance. The screw platter is ground by the surface grinding machine. It can guarantee oil line precision and improve oil output rate. The castor oil extraction machine’s distribution, automatic heating, and other standard components are all selected from well-known brands, which optimizes machine configuration. The surface of the machine is treated with stainless steel and chromium plating, meeting food hygiene standards.
Characteristics of castor oil press machine:
The production process of castor oil press: the castor oil press should be checked on the lubrication condition every 50 hours or so. The oil cup on the reducer should not be short of oil. The bearing in the adjusting screw shaft should be filled with butter every shift in the adjusting screw hole. All lubricating parts shall prevent the invasion of dust and other impurities. The oil quality of the reducer shall be checked once a year. If any deterioration is found, all oil shall be replaced. When the amount of pressing is reduced and, the screw shaft should be extracted. Check the wear of the screw, the strip, and the ring. The worn parts should be replaced in time. At the end of each shift, the machine should be cleaned. It should be maintained before long-term storage. Remove, wash and re-grease the screw and strip, and put them in the dry place.
Send product request
Other supplier products
 |
Palm Kernel Oil Press Machine | Contact Us Oil palm is a widely planted oil crop in the tropics. Not only the palm fruit but also the palm kernel can extract oil. In general, the ... |
 |
YZYX120ZHWK Centrifugal Automatic Temperature Controlled Combined Oil Press | YZYX120ZHWK combined oil presswith centrifugal combines with the centrifugal oil filter above the basic function of auto-heating the press cage by ... |
 |
Rapeseed Oil Press Machine | Canola oil press machineis mainly composed of electrical control, automatic heating, adjustment, transmission, and vacuum oil filter. The screw is ... |
 |
Peanut Oil Press Machine | New groundnut oil pressing machinesuccessfully makes up for the defect that the peanut cake cannot be reused after being pressed at a high temperat... |
 |
Cold Oil Press Machine | Cold pressing is to press the oil directly in the oil press without heating after the oil is screened and cleaned. It is difficult to press the oil... |
Same products
 |
GT-FM24-PLC Filling Machine(3+9+9+3) Triple Guide Tube | Seller: Zhaoqing City Greater Technology Co., Ltd | * Description GT-FM-PLC (triple guide tubes in 6-48 station)MGO powder filling machine, is improv... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | Seller: Eurion Automation Co., Ltd. | High-Precision Servo Control System：Equipped with an industrial-grade control platform and import... |
 |
GT-FM18-PLC Filling Machine(8+2+8) Triple Guide Tube | Seller: Zhaoqing City Greater Technology Co., Ltd | * Description GT-FM-PLC (triple guide tubes in 6-48 station)MGO powder filling machine, is improv... |
 |
48 Station Fillimg Mahcine GT-FM48 | Seller: Zhaoqing City Greater Technology Co., Ltd | * DescriptionFM filling machine suitable for fill tubular heaters in long length, different diame... |
 |
8 Station Fillimg Mahcine GT-FM8 | Seller: Zhaoqing City Greater Technology Co., Ltd | * Description FM filling machine suitable for fill tubular heaters in long length, different diam... |
