PVC Injection Molding
Polyvinyl Chloride (PVC or Vinyl) is a high strength thermoplastic material widely used in applications, such as pipes, medical devices, wire and cable insulation...the list is endless. It is the world's third-most widely produced synthetic plastic polymer.
Polyvinyl Chloride can be injection molded just like other plastics but the inclusion of chlorine in the material complicates the process. This is because melted PVC can give off a corrosive toxic gas. Accordingly, shops need to be equipped with sufficient ventilation systems. Those that aren’t are likely to be hesitant to work with the material. Additionally, special corrosive resistant materials like stainless steel or a chrome plating are required for the mold tool when injection molding PVC plastic. Shrinkage in PVC tends to be between one and two percent but can vary based on a number of factors including material durometer (hardness), gate size, holding pressure, holding time, melt temperature, mold wall thickness, mold temperature, and the percentage and type of additives.
Properties of PVC Injection Molding
General performance PVC resin is a white or light yellow powder with a relative density of 1.35-1.45. The hardness of the product can be added by PVC transparent board PVC transparent board. Adjust the number of plasticizers. Pure PVC has low water absorption and permeability.
Thermal properties: The thermal stability of PVC is very poor. It begins to decompose at 140 ° C and the melting temperature is 160 ° C. The coefficient of linear expansion of PVC is small, and it is flame retardant, and the oxidation index is as high as 45 or more.
Electrical properties: PVC is a polymer with better electrical properties, but due to its greater polarity, electrical insulation is not as good as PP and PE. Dielectric constant, dielectric loss tangent and volume resistivity are large, corona resistance is not good, generally suitable for low-voltage and low-frequency insulating materials.
PVC Injection Molding Requirement
Injection Molding Condition Value Unit for reference
Drying Temperature 60-90 °C
Drying Time 4.0-6.0 hr
Suggested Moisture Content <=0.30 %
Rear Barrel Temperature 160-180 °C
Middle Barrel Temperature 170-190 °C
Front Barrel Temperature 180-200 °C
Nozzle Temperature 180-200 °C
Mold Temperature 40-60 °C
Feman Tooling is one of professional plastic moulded products manufacturers. We provide Automotive Parts, Home Appliance, injection molding mold,pvc plastic injection moldingand so on. Want to know can pvc be injection moldedand what does injection moulding make? Want to know about pvc injection price? Please contact us.
Send product request
Other supplier products
 |
Uscrew Injection Molding | Unscrew injection molding, as its name implied, there is thread in the plastic part for easy assemble and connection with other screw parts. Unscre... |
 |
2K /2 Shot Injection Molding | A 2K/two-color mold is a mold in which two plastic materials are injected on the same injection molding machine and molded in two parts, but the pr... |
 |
Acrylic Injection Molding | Acrylic is a transparent thermoplastic homopolymer known more commonly by the trade name “plexiglass.”The material is similar to polyca... |
|
|
PVC Injection Molding | Polyvinyl Chloride (PVC or Vinyl) is a high strength thermoplastic material widely used in applications, such as pipes, medical devices, wire and c... |
 |
PP Injection Molding | Polypropylene, abbreviated as PP, is a colorless, odorless, non-toxic, translucent solid substance. Polypropylene (PP) is a thermoplastic synthetic... |
Same products
 |
GT-FM24-PLC Filling Machine(3+9+9+3) Triple Guide Tube | Seller: Zhaoqing City Greater Technology Co., Ltd | * Description GT-FM-PLC (triple guide tubes in 6-48 station)MGO powder filling machine, is improv... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | Seller: Eurion Automation Co., Ltd. | High-Precision Servo Control System：Equipped with an industrial-grade control platform and import... |
 |
GT-FM18-PLC Filling Machine(8+2+8) Triple Guide Tube | Seller: Zhaoqing City Greater Technology Co., Ltd | * Description GT-FM-PLC (triple guide tubes in 6-48 station)MGO powder filling machine, is improv... |
 |
48 Station Fillimg Mahcine GT-FM48 | Seller: Zhaoqing City Greater Technology Co., Ltd | * DescriptionFM filling machine suitable for fill tubular heaters in long length, different diame... |
 |
8 Station Fillimg Mahcine GT-FM8 | Seller: Zhaoqing City Greater Technology Co., Ltd | * Description FM filling machine suitable for fill tubular heaters in long length, different diam... |
