13 3/4" Yichuan tci tricone drill bit for sale
|
BasicalParameter |
|
|
Bit Size |
13 3/4"(350MM) |
|
IADC Code |
537 |
|
Connection |
6 5/8"API reg pin |
|
Rotary Speed(rpm) |
110~40 |
|
Weight on Bit(KN/MM) |
|
|
Formation |
Low compressive strength, medium hard formation with hard abrasive interlayer,like Hard shale, anhydrite, soft limestone, sandstone, dolomite with mezzanine, etc. |
1)Cutting StructureThe wear-resisitance of the teethy is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for the steel tooth bit. The durability of premium tngsten carbide inserts is improved with new formulas and new techniques for insert bit.
2)Gauge Structure
Multipe gauge protection with gauge trimmers on the heel of cone, tungsten carbides insert and hardfacing on the shirt tail increases gauge holding capability and bearing life.
3)Bearing structure
High precisiong journal bearing with two thrust faces.Balls lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver plated. abrasion resistance and seizure resistance of the bearing are improved.
4)Seal and LubricationPremium HNBR O-ting, optimal seal compression and curved seal strcture can enhance seal performance. The pressure compensat or system and adwanced grease can greatly increase the lubricating reliability.
5)Product Application It can receive high WOB in the conwentional drilling. Ti is suitable for various formations by matcing cutting structure with defferent tooth shape, tooth density and tooth exposure height.
Send product request
Other supplier products
 |
api 4 1/2" steel tooth bit all type open center 8 3/4" tricone drill bits | BasicalParameter Bit Size 8 3/4"(222MM) IADC Code 127 Tooth Type Steel /Milled Tooth B... |
 |
9 7/8" IADC127 Milled tooth tricone bit | BasicalParameter Bit Size 9 7 /8"(250.8MM) IADC Code 127 Tooth Type Steel /Milled Tooth ... |
 |
7 7/8" IADC537 tci tricone bit for water drilling | BasicalParameter Bit Size 7 7/8"(200MM) IADC Code 537 Connection 4 1/2"API reg pin R... |
 |
7 1/2 inch tci tricone drill bit for water well drilling | BasicalParameter Bit Size 7 1/2"(190.5MM) IADC Code 537 Connection 4 1/2"API reg pin R... |
 |
tungsten carbide insert IADC537 rock bit 7 1/2'' tricone bit for drilling | Size of Rock Bit 7 1/2 inch 190mm IADC Code 537 Thread Connection 4 1/2REG Operating Parameters WOB (Weight On Bit) 0.35-1.05 RPM ... |
