13 5/8 IADC537 Tricone Drill Bit For Water Well
|
BasicalParameter |
|
|
Bit Size |
13 5/8"(346MM) |
|
IADC Code |
537 |
|
Connection |
6 5/8"API reg pin |
|
Rotary Speed(rpm) |
110~40 |
|
Weight on Bit(KN/MM) |
|
|
Formation |
Low compressive strength, medium hard formation with hard abrasive interlayer,like Hard shale, anhydrite, soft limestone, sandstone, dolomite with mezzanine, etc. |
1)Cutting StructureThe wear-resisitance of the teethy is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for the steel tooth bit. The durability of premium tngsten carbide inserts is improved with new formulas and new techniques for insert bit.
2)Gauge Structure
Multipe gauge protection with gauge trimmers on the heel of cone, tungsten carbides insert and hardfacing on the shirt tail increases gauge holding capability and bearing life.
3)Bearing structure
High precisiong journal bearing with two thrust faces.Balls lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver plated. abrasion resistance and seizure resistance of the bearing are improved.
4)Seal and LubricationPremium HNBR O-ting, optimal seal compression and curved seal strcture can enhance seal performance. The pressure compensat or system and adwanced grease can greatly increase the lubricating reliability.
5)Product Application It can receive high WOB in the conwentional drilling. Ti is suitable for various formations by matcing cutting structure with defferent tooth shape, tooth density and tooth exposure height.
Send product request
Other supplier products
 |
17 1/2" tci tricone bit for water well drilling / three-cone rock bit | BasicalParameter Bit Size 17 1/2"(444.5MM) IADC Code 537 Connection 7 5/8"API reg pin Rotary Speed(rpm) 110~40 Weig... |
 |
20" iadc127 steel tooth tricone bit for different formation | BasicalParameter Bit Size 20"( 508MM) IADC Code 127 Tooth Type Steel /Milled Tooth B... |
 |
14 3/4 inch (374.6mm) tci Tricone Drill Bit For Water Well Drilling | BasicalParameter Bit Size 14 3/4"(374.6MM) IADC Code 537 Connection 7 5/8"API reg pin ... |
 |
Sealed bearing 11 5/8 inch steel tooth milled tooth well drilling bit | BasicalParameter Bit Size 11 5/8"(295.3MM) IADC Code 127 Tooth Type Steel /Milled Tooth ... |
 |
8 3/4'' Steel tooth drill bit with sealed bearing roller bit | BasicalParameter Bit Size 8 3/4"(222.2MM) IADC Code 127 Tooth Type Steel /Milled Tooth ... |
