15 1/2 inch IADC537 sealed bearing soft rocks drilling TCI tricone bits
BasicalParameter |
|
Bit Size |
15 1/2"(393.7MM) |
IADC Code |
537 |
Connection |
7 5/8"API reg pin |
Rotary Speed(rpm) |
110~40 |
Weight on Bit(KN/MM) |
|
Formation |
Low compressive strength, medium hard formation with hard abrasive interlayer,like Hard shale, anhydrite, soft limestone, sandstone, dolomite with mezzanine, etc. |
1)Cutting StructureThe wear-resisitance of the teethy is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for the steel tooth bit. The durability of premium tngsten carbide inserts is improved with new formulas and new techniques for insert bit.
2)Gauge Structure
Multipe gauge protection with gauge trimmers on the heel of cone, tungsten carbides insert and hardfacing on the shirt tail increases gauge holding capability and bearing life.
3)Bearing structure
High precisiong journal bearing with two thrust faces.Balls lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver plated. abrasion resistance and seizure resistance of the bearing are improved.
4)Seal and LubricationPremium HNBR O-ting, optimal seal compression and curved seal strcture can enhance seal performance. The pressure compensat or system and adwanced grease can greatly increase the lubricating reliability.
5)Product Application It can receive high WOB in the conwentional drilling. Ti is suitable for various formations by matcing cutting structure with defferent tooth shape, tooth density and tooth exposure height.
Send product request
Other supplier products
9 1/2 inch milled tooth tricone bit for well drilling equipment | BasicalParameter Bit Size 9 1/2"(241.3MM) IADC Code 127 Tooth Type Steel /Milled Tooth B... | |
14 3/4 inch (374.6mm) tci Tricone Drill Bit For Water Well Drilling | BasicalParameter Bit Size 14 3/4"(374.6MM) IADC Code 537 Connection 7 5/8"API reg pin ... | |
10 5/8 inch milled tooth tricone drill bit | BasicalParameter Bit Size 8 1/2"(216MM) IADC Code 127 Tooth Type Steel /Milled Tooth Bea... | |
8 1/2inch IADC617 Factory made water well single roller cone bit | Bit Size 8 1/2"(215.9MM) Model 617 Application Suitable for roller bits core barrels for pile foun... | |
7 7/8" IADC537 tci tricone bit for water drilling | BasicalParameter Bit Size 7 7/8"(200MM) IADC Code 537 Connection 4 1/2"API reg pin R... |
Same products
Excavator Cylinder Pins Induction Hardening | Seller: TianYuan Induction Electric(Chengdu)Co., Ltd | Excavator Cylinder Pins Induction Hardening Product Description This Complete Induction Hardeni... | |
3 Axis Glue Dispensing System Robot clutch dispensing Machine for Glue Epoxy Adhesive potting | Seller: 824681 | AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic ep... | |
Automatic Glue Mixing and Potting Machine for LED driver | Seller: 824681 | AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic ep... | |
AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic epoxy resin potting machine 2 Part Silicone plyurethane epoxy dosing and dispenser potting machine | Seller: 824681 | AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic ep... | |
Double Liquid AB Adhesive Dispenser Equipment | Seller: 824681 | Double Liquid ABAdhesiveDispenserEquipment AB glue meter mix dispensing machine/automatic glue ... |