18-liter coating filling machine
Paint filling machine 18 liter paint filling machine
I. Uses and performance:
Application: Coating, ink, paint, asphalt, glue, lubricating oil, petrochemical industry, fine chemical industry and other liquid, fluid and paste products. ：
II. Main features: 1. The system adopts weighing filling, which has high measurement accuracy and is not affected by materials. : 2 The feeding valve consisting of fast and slow feeding can not only improve the filling speed but also improve the filling accuracy. : 3 The measurement range is large, and the measurement error is less than 10g/barrel. : 4 The filling head adopts drip-proof device, and the poured material has no bubble, with good effect. : 5 Automatic control of material feeding, equipped with pneumatic clamp cover and pneumatic pressure plate device. Main structure and working principle: The computerized quantitative filling machine consists of feeding system, weighing system, frame, capping system, pneumatic control, control system and unpowered raceway. ：
Feeding mode: continuous and stable feeding is required (feeding by feeding pump or hopper under pressure): the feeding mechanism is operated by solenoid valve to feed quickly and slowly through cylinder respectively.
：
Filling method: general conventional filling and lifting submersible filling (selected according to the need of ordering): the weighing system consists of weighing bracket, sensor and weighing platform, equipped with unpowered roller and frame support and filling system. ：
Pneumatic control system: control fast and slow feeding valves. During use, the weighing platform is not allowed to be subjected to additional external forces. The filling nozzle height can be adjusted by the top handwheel.
：
Operation description:: Manually move the bucket; Manually start; Open the automatic feeding pump and feeding valves; Close the fast feeding valve at the set working point 1; Stop the feeding pump and slow down the feeding valve at the set working point 2; Manually cover and move the barrel zhi gland position (with auxiliary positioning device); Manually capping, and manually moving the barrel after capping; Warehousing. (Upper and lower barrels with stainless steel raceway)
Other supplier products
|
|
GZM-10A/D liquid quantitative filling machine |
Applicable: The quantitative filling system of coatings, solvents and chemical raw materials is made by PLC, which is safe and reliable. The fillin... |
|
|
MD-600/200 metal detector |
MD-600/200 metal detector Metal detectors are mainly used in the detection of metal impurities in the food industry, and metal detectors for food.... |
|
|
WH-1000L-B automatic filling machine |
Product parameter Use AC220V 50/60Hz power supply, and the filling speed is 30-50 barrels per hour (depending on the material flow rate). The filli... |
|
|
Liquid quantitative packaging machine (big bag) |
Quantitative liquid packaging machine (big bag) package size: 70-250mm Filling range: 10-2500g Packing speed: 45-65 packs/minute (depending on the ... |
|
|
Anticorrosive filling machine |
Basic introduction The filling line for daily chemicals can be used for filling various bottled pastes and liquids such as food, medical use, cosm... |
All supplier products
Same products
