.

Cooling Tower Gearbox For Marley

Marley gearboxreducer is a kind of reduction equipment used for china cooling tower. It adopts two-stage (spiral bevel / spiral) gear to reduce the speed. Its structure is simple and reliable. Compared with low-level gear set, it has longer service life and reduces the sound by more than 30%.

Repair And Daily Maintenance Of Marley Cooling Tower Gearbox

Attention should be paid to the maintenance of wet and dry cooling towergearbox: keep the gear reducer clean and dust-free. Always check the appearance of the marley gear reducerfor misaligned parts. Thickener reducers usually check whether the bearings have been replaced or refueled, and check the incoming terminals.

If the gear condition is to be maintained, the gear reducer of thickener will run continuously, so routine maintenance is very important. Thickener reducer gear reducer work, please pay attention to the working environment, do not excessive turbulence, so as not to damage or shorten the gear reducer.

Check the appearance, whether the fan works normally, whether there is abnormal vibration, whether the coupling is reliable, whether the base is fixed, whether the bearing works normally (listen to the sound), whether the temperature is normal (infrared thermometer), whether the current is normal (clamp type ammeter) the reducer must also check the carbon brush and slip ring. If on the one hand there is an abnormality, the gear reducer must be repaired quickly.

Maintenance Method Of Cooling Tower Gearbox For Marley

If you want to know more information about cooling tower gearbox repair, please visit our website.


Send product request

To: Zhejiang Aoshuai Refrigeration Co., Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Cooling Tower Pump
Cooling Tower Pump The water pump is designed to pump the circulating working water from the heating parts of air conditioners and industrial machines, and sends it t...
Round Cooling Tower
Round Cooling Tower The round cooling toweruses the contact between air and water to cool the water, and uses water as the circulating coolant to absorb heat from the ...
Cooling Tower Gearbox
Cooling Tower Gearbox The gear reducer is designed as a kind of reduction equipment of a cooling tower, which is generally used for transmission equipment with low speed...
Cooling Tower Motor For Baldor
Cooling Tower Motor For Baldor Baldor cooling tower motordoes not need gearbox, so the power consumption is reduced, the safety is increased, and the installation and disassembly...
Cross Flow Cooling Tower
Cross Flow Cooling Tower Cross flow cooling tower is an induced draft cooling tower that can cool water. Cross flow cooling tower working: The water flows vertically from t...
All supplier products

Same products

XD-MAX Winch for Drone
XD-MAX Winch for Drone Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD XD-MAX Winch for Drone The XD-MAX Winch for Droneis a high-performance aerial lifting solution d...
XD-55 Winch for Drone
XD-55 Winch for Drone Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD XD-55 Winch for Drone Introducing the XD-55 Winch for Drone—an advanced lifting system eng...
XD-10 Winch for Drone
XD-10 Winch for Drone Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD XD-10 Winch for Drone SAFE, EFFICIENT AND CONVENIENT.Your reliable and intelligent air transport...
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series Seller: Uratech USA Inc TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m...
Uratech Tool scoot cart for 50 taper tool holders
Uratech Tool scoot cart for 50 taper tool holders Seller: Uratech USA Inc Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so...