Wire Wrapped Screen Pipe
The continuous-slot well screen is widely used throughout the world for water, oil, and gas wells, and is the dominant screen type used in the water well industry.
SAIGAO GROUPContinuous-Slot Well Screen is made by winding cold-rolled wire, approximately triangular in cross section, around a circular array of the longitudinal rods. The wire is attached to the rods by welding, producing rigid one-piece units having high strength characteristics at minimum weights. Slot opening for continuous-slot screens are manufactured by spacing successive turns of the outer wire to produce the desired slot size. All slots should be clean and free of burrs and cuttings.Each slot opening between adjacent wires is V-shaped, from the special shape of wire used to form the screen surface. The V-shaped openings designed to be nonclogging, are narrowest at the outer face and widen inwardly.
Features of WireWrapped Pipeand Wire Wrapped Screen:
Applications of Wire Wrapped Screen Pipe:
The wire-wound screen is a perforated water filter. It can be used together with deep well pump and submersible pump, and can also be used for water treatment equipment, environmental protection, seawater conversion to industrial water and domestic water desalination treatment, tap water treatment, water softening treatment, petrochemical industry, terminal filtration of petroleum products. And filtration of chemical acid, alkali liquid, and organic solution such as alcohol.
Schroeder wire screen, also known as "all-welded wire-wound screen", is widely used in petroleum, paper, chemical, natural gas, food, sugar, starch, beer, water well sand control industries. Its position in the beer filtration industry is particularly prominent, and it is the most widely used filter material for various liquid resources in the solid-liquid separation process.
Technical Specification of Wire Wrapped Screen Pipe:
|
Screen Size |
Inside Diameter |
Outside Diameter |
OD of Female Threaded End |
||||
|
in |
mm |
In |
mm |
in |
mm |
In |
mm |
|
2 |
51 |
2 |
51 |
25/8 |
67 |
23/4 |
70 |
|
3 |
76 |
3 |
76 |
35/8 |
92 |
33/4 |
95 |
|
4 |
102 |
4 |
102 |
45/8 |
117 |
43/4 |
121 |
|
5 |
127 |
5 |
127 |
55/8 |
143 |
53/4 |
146 |
|
6 |
152 |
6 |
152 |
65/8 |
168 |
7 |
178 |
|
8 |
203 |
8 |
203 |
85/8 |
219 |
91/4 |
235 |
|
10 |
254 |
10 |
254 |
103/4 |
273 |
113/8 |
289 |
|
12 |
305 |
12 |
305 |
123/4 |
324 |
133/8 |
340 |
|
14 |
356 |
131/8 |
333 |
14 |
356 |
— |
— |
|
16 |
406 |
15 |
381 |
16 |
406 |
— |
— |
|
20 |
508 |
18 3/4 |
476 |
20 |
508 |
— |
— |
|
Slot size (mm):0.10,0.15,0.2,0.25,0.30-3,also achieved upon customer request. |
|||||||
|
Open area up to 60%. |
|||||||
|
Material : Low Carbon ,Low Carbon Galvanized steel (LCG),, steel treated with plastic spraying,Stainless Steel |
|||||||
|
Steel( 304,etc.) |
|||||||
|
Lengths up to 6 meters. |
|||||||
|
Diameter ranging from 25 mm to800 mm |
|||||||
|
End Connection :Plain beveled ends for butt welding or threaded. |
|||||||
Saigao Group specializing in design, research, and development, processing, and manufacturing. sales and export of machinery equipment, with leading products comprising various kinds of mudpumps, down-hole motors, any kinds of screen pipes, oilfield cementing toolsas well as any kinds ofwellhead equipment.
Send product request
Other supplier products
 |
Mud Pump Parts | Mud pump spareparts(mud pump spares) are used on drilling rigs for the circulation of mud. These reciprocating pumps are suited for the process of ... |
 |
External Sleeve Choke Valve | With integral cage design technology, inner annular space had been increased, and in this way, the possibility of corrosion for valve core shall be... |
 |
LINER HANGER | The liner cementing is realized by the liner hanger, which reduces the casing weight of the first well in the deep well, improves the load of the r... |
 |
Hydraulic Liner Hanger Landing Collar | The landing collarcomprises housing, ball seat and latch. The latch holds ball seat through pins. After the hanger is set, pressure is applied to r... |
 |
Circulating Swage | Saigao casing circulating swageis forged from high-grade steel materials and machined to the required specifications. After heat treatment and non-... |
Same products
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Seller: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | Seller: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
 |
3 in1 Decoiler Leveler Feeder | Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd. | 3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f... |
 |
NC Servo Feeder (0.1-3.0mm) | Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd. | NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of... |
 |
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage | Seller: Uratech USA Inc | TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool... |
