L SEALER MACHINE
Guonuo's l type sealer machineis a high-speed L-sealing solution for wrapping using Bopp film. The Ltype sealermachine is often linked with Guonuo's heat shrink tunnel machine to fulfill the heat shrink process.
Guonuo's Lsealermachine is ideal for high speed, providing excellent performance and high cost-efficiency. The capacity of this L-type seal packing machine can be up to 20 packs per minute. The operator is only served to monitor, load packets, and replace the film.
L SEALER FOR SALE
Automatic L Sealer Machine
As an entry-level economical sealing and cutting machine, the automatic L-shaped sealing, cutting and shrinking packaging machine has a simple and reliable structure, and has all the functions of automatic film feeding, punching, sealing and cutting like other L-bar sealer machines.
Vertical Sealing Machine
Automatic vertical l sealer machine is upgraded from the l sealer machine, which is suitable for packaging the taller or thinner products. The sealing line is firm and in the middle of one side with good appearance.
L SEALER MACHINE VIDEO
Guonuo's L-type sealer machine has our specific characteristics as below.
- Fully automatic
- L-sealing
- Big Man-machine interface
- Adopts import PLC
- Preset programs
- Digital display
- Pre-settable product counters
- Alarm display
- Waste film recycling
- Stable conveyor
- Easy to replace film
L SEALER MACHINE WORKING PRINCIPLE
The l sealer machinefor sale only uses center-folded film which can be made by bopp, pe, or other heat shrink film.
As the film is pulled off the roll, a flat and horizontal guide/loading tray separates the two layers. One layer is under the tray and the other is held above the tray. This allows the operator to place the product on the tray between the two layers of film in the corner formed by the fold and the front edge of the film.
The film, containing the product, is pulled forward into the sealing area. A sealing bar in the form of an “L” is pulled down. After the conveyor feeds the product into the film, the L-bar sealer machine can measure the length of the product and perform sealing automatically by the sensor and the sealing jaws.
Once sealed, the closed pouch is then moved into a heat shrink tunnel by the soft conveyor automatically, shrinking and tightening the film. The left lateral film which is trimmed off during the packaging process is automatically rolled up on a waste film recycle reel after the sealing and cutting.
Now the l sealer machine priceis low, anything you need, please contact us.
Send product request
Other supplier products
 |
NEMA 34R ROUND STEPPER MOTOR | NEMA34 motoris a round stepper motor. The front cap is 86*86, but the motor body is round. NEMA 34ROUND STEPPER MOTOR BODY SIZE NEMA 34 PO... |
 |
BRUSHLESS DC MOTOR | brushless dc motor factory/ brushless motor supplier/ china brushless dc motor manufacturers/ china brushless dc motor supplier bldc motor made in... |
 |
NEMA 34 STEPPER MOTOR | China NEMA 34 stepper motoris a standard hybrid stepper motor, with a step angle is 1.8°. NEMA 34 SQUARE STEPPER MOTOR BODY SIZE NEMA 34 ... |
 |
MOTOR ENCODER | Encoders are mainly used to feedback on the closed-loop system such as motor running position and winding number. Common encoders are divided into ... |
 |
NEMA 23 ROUND STEPPER MOTOR | NEMA 23 ROUND STEPPER MOTOR QUALITY Unlike the nema 23 size motor, the NEMA23 round stepper motor driveris round one, and the size is 56.4*56.4. ... |
Same products
 |
Step Drill | Seller: SINOLITE TOOLS LTD. | Step Drill Step Drill Bits | Step Drill Bit Set Supplier & Wholesale Step drill bitsare a s... |
 |
Twist Drill | Seller: SINOLITE TOOLS LTD. | Twist Drill Precision Twist Drill Bits | HSS, Cobalt & Carbide Drills Precision twist drill... |
 |
Metal Cutting Tools | Seller: SINOLITE TOOLS LTD. | Metal Cutting Tools Metal Cutting Power Tools & Cutting Tools for Metal | Sinolite Looking ... |
 |
Taper Shank Drill | Seller: SINOLITE TOOLS LTD. | Taper Shank Drill Taper Shank Drill Bits | HSS Taper Shank Drills Supplier Taper shank drill bi... |
 |
Traditional Welding in Furniture Manufacturing | Seller: Traditional Welding in Furniture Manufacturing | Traditional Welding in Furniture Manufacturing Pain Points of Traditional welding operat... |
