HMHG Series Harmonic Drive Hat Type

The flexspline belongs to hollow flanging standard structure, compact design, zero backlashes, coaxial output and input, excellent positioning accuracy, and rotation accuracy. Contact harmonic drive company Han's Motion for more information.

HMHG-Ⅰ Series Unit (Hollow Shaft) Harmonic Gearing

With compact hollow shaft and a robust cross roller bearing which enables the output flange to mount the loads directly without additional supports, ensuring a simple and space-saving design. Light weight is very important for some applications, HMHG-I-LW is available for lightweight solution. HMHG-I is available in 6 size with ratios from 50:1 to 160:1.

HMHG-Ⅱ Simple Unit (Flat) Series Harmonic Gearing

Input shaft connects with an inner hole of wave generator through Oldham coupling, flat shape, and standard structure

HMHG-Ⅱ-E Simple Unit (Flat & Integral Cam) Series Harmonic Gearing

Compared with HMCG-II, wave generator with integrated cam for HMCG-II-E. The integrated output cross roller bearing with high titling capacity enables the output flange to mount the loads directly without additional supports, ensuring a simple and space-saving design. The absence of input and output flanges features a fabulous flexible design. HMHG-II is available in 6 size with ratios from 50:1 to 160:1.

HMHG-Ⅲ Simple Unit Flat Hollow Shaft Series Harmonic Drive

High torque simplicity series with a hollow input shaft, the absence of input and output flanges features a fabulous flexible design. HMHG-III is available in 6 size with ratios from 50:1 to 160:1.

HMHS-IV Unit (Shaft Input) Series Harmonic Gearing

The integrated output cross roller bearing with high titling capacity enables the output flange to mount the loads directly without additional supports, ensuring a simple and space-saving design. Fully sealed and easy to mount to motor. Performs fantasy on bevel gears and synchronous belt device applications.

HMHG-V Unit (Hollow & Long Shaft) Series Harmonic Gearing

With input shaft can mount to motor directly. Low speed hollow shaft through supply lines, shafts or cables. Encoder can be mounted to both input and output shaft. Especially for Cobots and the device with joint modular.

Design Guide Of HMCG Series Harmonic Drive Cup Type

In Order To Give Full Play To The Performance Of Harmonic Reducer, Please Pay Attention To The Follo

Make the input shaft, circular spline, output shaft, and shell concentric.

Wave generators can produce axial force. Please make the input shaft into some structure that can support the force.

Since the china harmonic reduceris a small device that can transmit larger torque, please adopt suitable tightening torque to tighten the screw that connects the flex spline with the output shaft.

Flexspilne can have elastic deformation, so please adopt the recommended size to design the inner wall of the shell.

Input shaft and output shaft must adopt matched bearings (leave space for 2 - point support) and the structure that can bear radial load and axial load. Please do not exert too much force on the wave generator and flex spline.

Make sure the flange diameter of the flex spline does not exceed the wheel bore diameter of the flex spline and process fillet on the flange that connects the diaphragm. Please adopt the recommended size to design all parts.

Use a C-shape clamp ring to fix the hub of the wave generator and make sure the hook of the clamp ring does not touch the flex spline or wave generator.

Design Guide Of HMCG Series Harmonic Drive Cup Type

How Do You Calculate The Gear Ratio On A Harmonic Drive?

Calculating the gear ratio on a Harmonic Drive involves understanding the structure and components of the drive. The gear ratio is determined by the number of teeth on the circular spline, flexspline, and wave generator. To calculate it, divide the number of teeth on the circular spline by the number of teeth on the flexspline. This ratio represents the speed reduction or multiplication achieved by the Harmonic Drive. It's important to note that the gear ratio can be further influenced by the specific design and configuration of the Harmonic Drive.

What Is The Transmission Ratio Of Harmonic Drive?

The transmission ratio of a Harmonic Drive, also known as the gear ratio or reduction ratio, is determined by the number of teeth on the circular spline, flexspline, and wave generator. The gear ratio represents the speed reduction or multiplication achieved by the Harmonic Drive. In a typical Harmonic Drive, the gear ratio can range from 30:1 to 320:1, or even higher in specialized versions. This means that for every rotation of the input shaft, the output shaft rotates a certain number of times determined by the gear ratio. The specific gear ratio of a Harmonic Drive depends on the configuration and specifications of the particular model, we have model for harmonic gear drive reducer, check for more information with this link.

If you want to know more kinds of power drive gearbox, please visit our website.

Other supplier products

	Harmonic Drive	Through big data modeling, simulation optimization and performance verification, Han's Motion team realizes the optimal design of tooth profile, br...
	HMCG-Ⅱ Series Unit Harmonic Gearing	HMCG-Ⅱ Series Unit Harmonic Gearing HMCG-II series flex spline belongs to a cup-shaped standard structure and its input shaft connects with the in...
	HMCG-Ⅱ-E Series Unit (Integral Cam) Harmonic Drive	HMCG-II-E series flex spline is a cup-shaped standard structure, input shaft connects with the wave generator inner hole directly fixed through a f...
	HMCD-Ⅱ Unit (Super Flat) Series Harmonic Drive	HMCD-II series, with a commitment to lightweight and compact size of harmonic gear transmission, not only inherits the advantages of traditional pr...
	HMHD-Ⅲ Simple Unit (Super Flat & Hollow Shaft) Series Harmonic Gearing	HMHD-III series is the type pursuing flat structure to the extreme. Its axial length is half of that of the HMHS series. The flexspline adopts an u...

All supplier products

Same products

	China GT-JYH12 Hot Runner Shrinking Machine(CNC)	Seller: Zhaoqing City Greater Technology Co., Ltd	* Description GT-JYH12 Hot Runner Shrinking Machine is a shrinking machine mainly for hot runner...
	China GT-JY18 18 Station Shrinking Machine	Seller: Zhaoqing City Greater Technology Co., Ltd	* Description GT-JY18 18 Staion Shrinking Machine is one popular tubular heater shrinking machin...
	Multiple Blades Digital Label Cutter VR350	Seller: WILLIAM CNC TECHNOLOGY	Multiple Blades Digital Label Cutter VR350 The VICUT multiple blades digital die cutterVR350, eq...
	Digital Label Die Cutting Machine VR240X	Seller: WILLIAM CNC TECHNOLOGY	Digital Label Die Cutting Machine VR240X VR240X digital label finisheris redeveloped based on th...
	Rotary die cutting machine VR320	Seller: WILLIAM CNC TECHNOLOGY	Rotary die cutting machine VR320 The VICUT VR320 roll to roll labels cutting machineis the most ...