ab part epoxy dispensing machine
1. It has the functions of continuous interpolation of points, lines, surfaces, arcs, circles, irregular curves and three-axis linkage, and can be adapted to glue filling of any irregular objects;
2. Ultra-large hard disk storage memory capacity, unlimited program storage, no need to reprogram, and the software has functions such as area array, translation and rotation operations;
3. The glue amount, thickness, glue coating speed, glue dispensing time, and glue stop time can all be set by parameters. The glue output is stable and there is no leakage of glue;
4. Optional CCD visual programming system to achieve fast programming;
5. The three functions of glue dispensing, glue filling and track potting are integrated and operated fully automatically;
6. Proportion as needed to achieve glue filling while mixing, maximizing glue savings;
7. Double barrel design, A glue and B glue are stored separately to ensure that the glue will not solidify if left for a long time;
8. The mixing ratio is adjustable from 1.:1 to 10:1, using static or dynamic mixing to ensure uniform and complete mixing;
9. The unique control system is not affected by air pressure factors and avoids uneven glue dispensing, wire drawing, bubbles and other phenomena;
10. A variety of glue filling modes can be freely switched. You can pour glue A, glue B, or glue AB individually. You can also manually fill glue A, glue B, or glue AB. If you have special requirements, you can use multi-stage quantitative filling. The glue mode can perform up to five stages of quantitative glue filling (the glue output and speed of each stage can be set separately)
11. Equipped with automatic feeding and suction functions to save manual feeding time and improve work efficiency;
12. The storage barrel is equipped with a liquid level sensor switch, which automatically alarms when the material is insufficient or full, and automatically shuts down for protection when the material is insufficient.
13. Equipped with glue stirring, optional heating and reserved vacuum degassing function, it is suitable for different types of filling processes.
14. Equipped with output counting, single piece timing and operation monitoring and alarm functions
15. The AB pump pulse coefficient setting wizard function is convenient for adapting to different types of glue from different manufacturers.
16. Reserved for stuck pump detection and flow monitoring functions. Optional for customers with high glue ratio and small error range
17. Intelligent automatic cleaning function, multiple modes of automatic cleaning to adapt to different environments.
18. The anti-curing procedure prevents the equipment from suspending glue filling and the glue hardening to block pipes and valve bodies.
19. Cleaning agent recycling system can improve cleaning agent utilization and effectively reduce waste.
20. The unique glue anti-curing mode can effectively prevent the mixing head from curing due to employee negligence.
multifunctional fully automatic glue potting machine is suitable for:
glue potting machine is widely used in LED lamps, P10 light panels, displays, LED drive power supplies, waterproof power supplies, modules, transformers, relays, chargers, ballasts, buzzers, clutches, solar junction boxes, Glue potting of communication junction boxes, battery middle covers, electronic and electrical products, crystal crafts, glue filling and packaging of transformers, potting of ion generators, etc.
suitable for glue:
Suitable for two-component 1:1-10:1 epoxy resin, organic silicone gel, crystal glue, polyurethane PU glue and other two-component glues
Send product request
Other supplier products
 |
Hot Sell Fully Automatic Glue Potting Machine Two Component Glue Filling Machine | ab glue mixing and dosing machinePotting and encapsulation is the process of embedding products & assemblies in a liquid resin (potting compoun... |
 |
Full Automatic Potting Machine Ab Glue Dispenser Machine for LED Strip Light | Full Automatic Potting Machine Ab Glue Dispenser Machine for LED Strip Light Potting and encapsulation is the proces... |
 |
Introduction to Honeycomb Board Gluing Machine | Introduction to Honeycomb Board Gluing Machine In the realm of industrial manufacturing, the Honeycomb Board Gluing Machine stands out as a crucia... |
 |
Double Liquid AB Adhesive Dispenser Equipment | Double Liquid ABAdhesiveDispenserEquipment AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic epoxy res... |
 |
2 Part Metering Mixing and Dispensing Machine PU Resin Dynamic Polyurethane Dosing System Automatic Epoxy Resin Filling Machine Electronic Potting Machine | What is the difference between 2K AB adhesive materials manual potting machine and robot pottingmachine ? AutomaticAB potting machine is composed ... |
Same products
 |
Shoes Flexing Tester | Seller: Qinsun Instruments Co., Ltd | It's used for determining the flexibility resistance and or indicating the cracks od shoe or shoe... |
 |
Shoelace Abrasion Tester | Seller: Qinsun Instruments Co., Ltd | Application: This shoelace abrasion tester is used for shoelace against standard eyelet abrasion... |
 |
Heel Fatigue Tester | Seller: Qinsun Instruments Co., Ltd | Heel Fatigue Tester is used to determine the resistance of medium and high heels of ladies’... |
 |
Heel Impact Tester | Seller: Qinsun Instruments Co., Ltd | Heel Impact Tester is used to determine the impact strength of heels of ladies’shoes. Ap... |
 |
Ross Flex Tester | Seller: Qinsun Instruments Co., Ltd | Whole Sole ROSS Flexing Tester GT-KB05D To determine right angle flexing risistance for whole sol... |
