NCM-5.1 Internal Combustion Turnout Grinding Machine
NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head.
Other supplier products
|
|
ND-4.5 Internal Combustion Tamping Pick |
The portable internal combustion tamping pick is a small-scale track maintenance machine for railway track bed maintenance. It is mainly suitable f... |
|
|
NLB-2000 Internal Combustion Impact Wrench |
NLB-2000内燃冲击扳手主要用于铁路施工或维护作业中对钢轨扣件紧固螺栓、夹板固定螺栓上螺母的紧固或松开。该机采用能量叠加原理，利用瞬时峰值扭矩反复冲击动作，完成螺母的紧固或松开。该机结构紧凑，重量轻，便于携带。可完成垂直、水平、倾斜等不同方向布置的连接螺栓上螺母的紧固和松开。特别是对因生锈... |
|
|
36V lithium battery tamping pick |
Product advantages:1. Intelligent digital display, real-time display of remaining power and usage time (first in the industry)2. Three-level shock ... |
|
|
Digital sliding rail wear gauge |
LJ-HGM series sliding rail wear measuring ruler is used to measure the vertical wear value, side wear value and point rail reduction value of rails... |
|
|
Point Rails Lowering Value Measuring Ruler |
The frog vertical wear measuring ruler is used to measure the vertical wear value at any part of the worn section of the frog's core rail and wing ... |
All supplier products
Same products
