G234 Bed Blanket Flammability Tester

• 

The test instrument is used to detect the flame resistance of the blanket fabric and the flame spread performance of the fabric surface. The test method is to burn the surface of the specimen with a standardized flame for a specified period of time. Thus, the burning, damage degree and color change of standard test paper are observed and then assess the test fabric grade.

Structure

Flowmeter :Adjust the gas flow size.

Fire tube : The gas is first connected to the flow meter through the hose, and then through the rear hose of the box into the flame pipe

Windscreen: the upper part of the windshield is provided with glass

The experiment was carried out in a ventilated kitchen. The round hole on the top of the box and the gap on the windshield make the gas convection.

Control panel :Power- power switch ;Start：Start internal motor operation. When the flame tube moves to the test position (the vertical distance from the sample center is 8mm, the horizontal distance is 3.2mm), the internal timing switch is touched;

Reset :Timer reset /Fire tube reset.

Sample clamp and specimen holder :The sample frame substrate is provided with a knob which can adjust the left and right movement, and the sample frame substrate is moved and fixed by loosening and tightening the knob.

Timer :Display settings and actual ignition time.After the time is cleared, the fire tube can complete the required movement. Or the fire tube can not return to the original position after moving forward.

Standards

ASTM D4151 Standard Test Method for Flammability of Blankets

Operation

●After the sample is ready and the instrument is commissioned, place the assembled sample clamp on the specimen holder.

●Open the gas valve and supply the gas to the fire pipe. Use the electronic igniter to fire the burner

●Press the start button on the control panel. The fire tube moves forward and moved to the test position under the action of the mechanical transmission. Then, Start the ignition of the sample and test paper on the sample holder

●At the same time to start the ignition timing system, the control panel display and record the ignition time. After a second, the fire tube moving backwards, the timer stop time. The experiment is end.

●Finally remove the sample and test paper for rating.

Features

◆Stainless steel case with transparent viewing window

◆18 Needle flame, flame length adjustable

◆Ignition time can be set freely

◆Provide bristles and sample clamps

◆Provide standard stainless steel sample holder

Technical Parameters

Other supplier products

	Pressure-Flow Transmission Analyzer	The Pressure Transmission and Flow Tester is widely used in multiple fields and is mainly used to test the pressure transmission and flow performan...
	Drying Rate Tester	The drying rate tester is a professional device used to measure the drying rate of a substance. Application fields Textile industry: used to eva...
	Textile water evaporation rate tester	Standard: The design and operation of this tester are aligned with key international and national standards related to assessing the moisture mana...
	Rapid screening Calorimeter	Product Introduction： The rapid - screening calorimeter is a professional calorimetric instrument for the quick assessment of reaction thermal haz...
	Electrode tortuosity tester & diaphragm ion conductivity test device	Standard Electrode Tortuosity Analyzer: ASTM E1970-21 (Electrochemical Impedance Spectroscopy) ISO 18516 (Conductive Coatings – Resistivit...

Same products

	robotic friction stir welding	Seller: World Wide Welding	robotic friction stir welding ROBOTIC FRICTION STIR WELDING Robotic Friction Stir Welding...
	friction stir welding tool	Seller: World Wide Welding	friction stir welding tool FRICTION STIR WELDING (FSW) TOOLS Friction stir welding tool i...
	fsw welded parts supplier	Seller: World Wide Welding	fsw welded parts supplier FRICTION STIR WELDING(FSW) PRODUCTS FSW Welded Parts are compon...
	AI Empowered Embroidery Software	Seller: Zhejiang Maya Mechanical & Electrical Technology Co., Ltd.	AI Empowered Embroidery Software What is ? is a revolutionary image-to-embroidery convers...
	Textile Thermal Insulation Property Tester	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB/T 41560-2022 (China): Specif...