Pipe pressure and thermal stability of machine
The purpose of,
To measure hot and cold water with plastic pipe material, composite material (such as: PP, PP - B, PP - R - A, PZ - X, PB, PVC and aluminous model multiple tube, etc.) in the long-term constant under the internal pressure, the pressure of time and thermal stability, plastic pipe manufacturing and testing institutions necessary testing equipment.
hot and cold water piping system with polypropylene The second part of pipe and ISO1167 manufacturing standard requirements.
Three, testing machine
Equipment mainly has four parts
The computer system, main control box, incubator, tooling parts
Four, the main technical parameters
1. 3 or all independent control pressure;
2. The pressure range: 0-16 mpa;
3. The accuracy of pressure control: + / - 1%;
4. The pressure value resolution: 0.001 Mpa;
5. The temperature control range: at room temperature to 95 ℃;
6. Control accuracy: + / - 3 ℃;
7. The timing range: 0-9999 h59min59s;
8. Timing accuracy: 0.1%;
9. Voltage: 380 v / 220 v;
10. Envelop dimensions (mm)
The main control box: length * width * 1150 * 750 * 1700
Incubator: length * width * height 1350 * 730 * 1050 (DN80 the bore diameter, three way control)
Computer cabinet: length * width * height 940 * 800 * 1320
Five, the test pressure calculation
P = sigma * 2 emin/dem - emin
Sigma - plastic tubing ring stress (Mpa)
Dem - plastic tubing (mm) the average diameter
Emin - sample free part of the minimum wall thickness (mm)
Other supplier products
|
|
PSАseries air drive gas booster pump |
PSАseries air drive gas pump and the non-equilibrium gas distributing valve to achieve the reciprocating movement of the pump, all adopt the alumin... |
|
|
S series air drive liquid booster pump |
S series gas-liquid booster pump adopts single pneumatic non-equilibrium gas distributing valve to realize automatic reciprocating motion of the pu... |
|
|
Four pillar type punching machine |
Four pillar type punching machineCPB/CPBG seriesThe basic component ofL four-post type stamping the bodyL force of gas liquid cylinder(my company H... |
|
|
well control device of air tightness test system |
Seth, well control device for air tightness test, air tightness test system can satisfy the drilling bop, oil (gas) wellhead and tree, wellhead cho... |
|
|
GBS gas pressurization system |
GBS gas pressurization system:
Gas supercharging system is based on the actual needs of customers, the gas booster pump and parts assembly in tubu... |
All supplier products
Same products
